Can the Yaris handle 6psi with stock ECU, injectors and fuel pump?

[Nexus1155]

I'd like to tell you what model supercharger, but I won't. All I can tell you about the supercharger I have in mind, it's a maintenance-free unit. No oil required. The BOV will be located on the one and only piping that goes from the supercharger to the throttle body. I would use a BOV to prevent any boost from putting a strain on the impeller and for those who love the sound. I'm looking to run as much boost as possible with as little mods as possible.

Ok, you're really going about this all wrong first of all... Most SC nowadays are little to no maintenance at all. You won't be overboosting or putting strain on the unit with 6psi, and just to do it for people who love the sound is just ludicrous.

If you're buying a SC you obviously bought it for power, the sound you can make with a ghetto tail pipe whistle kit. And saying you're going to run as much boost as possible with little mods is an extreme understatement. Can you atleast provide a map for us to look at the flow rating of it?

I'm not trying to harsh on your thread or be a dick but its reality...If you don't want to post what supercharger it is, people will find out when you post a picture assuming you are going to test it first. and if not, we're just going to have to get a mystery supercharger i guess. But if its CDM, its CDM, not all of it is bad stuff.

If you can accomplish this then congrats on a job well done, but i think you need to take a step back and re-approach this and do more research on induction