|
05-16-2009, 01:18 PM | #1 |
Drives: white and red shiny things Join Date: Jan 2009
Location: Philippines
Posts: 140
|
lowering spring specs for Yaris
Since I originally posted asking about different lowering spring rates for the Yaris NCP91 chassis code, I started searching around until I realized I have a Hyper Rev magazine for the Yaris (duh!)
So I copied the rates and drops and am putting them here. MODS I hope you make this a sticky because this would be most helpful for everyone! Progress Group Springs – 110 lbs/in front and 130lbs/in rear 2kg/m front and 2.3kg/m rear DROP: 1.7’ F and 1.8’ R Tanabe NF210 – 140 lbs/in front and 123.2 lbs / in rear 2.5kg/m front and 2.2 kg/m rear DROP: 1.1’ F and 1.3’ R Tanabe DF210 - 168 lbs/in front and 123.2 lbs/in rear 3.0kg/m front and 2.2 kg/m rear DROP: 1.6’ F and 1.8’ R Tanabe GF210 - 218 lbs/in front and 196 lbs/in rear 3.9 kg/m front and 3.5 kg/m rear DROP: 1.2’ F and 1.4’ R TEIN H-Tech 157 lbs/in front and 179.2 lbs/in rear 2.8kg/m front and 3.2 kg/m rear DROP: 1.4’ F and 1.0’ R TEIN S-Tech 168lbs/in front and 196lbs/in rear 3.0kg/m front and 3.5 kg/m rear DROP: 1.4’ F and 1.2’ R (closer to 2' F&R accdg to users) Espelir Active Super Down 140lbs/in front and 168lbs/in rear 2.5kg/m front and 3.0/kg/m rear DROP: 1.4’ F&R C-One Motorsports 212.8lbs/in front and 145.6lbs/in rear 3.8kg/m front and 2.6kg/m rear DROP: 1.0’ F&R BLITZ 140lbs/in front and 168lbs/in rear 2.5kg/m front and 3.0 kg/m rear DROP: 1.4’ F&R RS*R 180lbs/in front and 171lbs/in rear 3.23 kg/m front and 3.06kg/m rear DROP: 1.2’ F&R (titanium springs available, same spring rates and drop) Megan Racing No published spring rates DROP: 1.5' F&R H&R No published spring rates DROP: 1.2' F & 1' R Eibach No published spring rates DROP: 1.1' F & 0.9 R * The specs for the Tanabe NF210, DF210 and Progress Springs I took from the Microimage website. The rest I took from my Hyper Rev magazine. ** I used 56 to convert kg/m to lbs/in vis-a-vis. *** Hyper Rev lists a range of the actual DROP so I simply put in the lowest drop but the variance is only 5mm from highest possible to lowest possible drop of the springs. **** All spring rates and drops in inches are rounded off to the nearest 100th decimal for simplicity's sake. At most you're looking at 0.02 variance. ***** If there are any errors please do post up and tell me so we can correct it. Thanks! If anyone wants the drops and spring rates for popular lowering springs for the older Yaris / Vios platforms and chassis, PM me your chassis code and I will post it here as well. Right now these are for all NCP91 chassis Yaris.
__________________
08' Yaris HB 5dr: RAYS 57 Motorsports 17X7 / K&N SRI / TANABE axleback exhaust / ULTRA RACING complete braces / MEGAN RACING complete braces / NEX coilovers / NEX 330mm 4-pot front BBK / PENGUIN GARAGE hub spacers / HOTBITS headers / BUDDY CLUB oil cap and rad cap / APP SS brake lines / HKS synthetic lubes / RECARO SR5 seats / TRD shiftknob / cheap FEDERAL (free) tires lol. NEXT: HKS F-CON iS Last edited by botchilah; 05-17-2009 at 10:30 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
what to look out for when installing lowering springs | songa | Performance Modifications | 34 | 09-15-2012 03:29 AM |
What alignment do you need after lowering spring and shock/strut install? | detroiter | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 7 | 05-07-2009 12:23 PM |
lowering spring life..?? | static808 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 04-14-2007 01:31 AM |
FS: Lowering Spring by Spirit (Hatchback) | nevermorez | Items for Sale by private party | 6 | 02-18-2007 12:32 AM |
Where can i buy a lowering kit and spring 4 toyota yaris S sedan (4 doors) | mariosuper | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 5 | 07-07-2006 09:06 PM |