 |
 |
|
|
12-07-2010, 04:45 PM
|
#6 |
|
Don't drive it, RALLY it!
Drives: 1999 echo PRC rally car Join Date: Oct 2008
Location: Joyner, Brisbane
Posts: 321
|
Take some oil pressure readings from the block, make sure the pressure there is as it should be first. Then find out what oil pressure those turbos from on Skylines and put a restrictor in the line to try and achieve that.
If you have a breather line from the rocker cover back into the intake before the turbo, put a clear plastic fuel filter in that to see if the oil is from blowby and coming into the system that way. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 09:14 PM |
| best synthetic oil and m/t oil?? | doodoo | DIY / Maintenance / Service | 122 | 04-03-2017 09:43 PM |
| Yoda's Turbo Log | Yoda | Forced Induction Forum | 404 | 08-17-2013 08:22 PM |
| Oil pressure sender fittment? | karlblanchard | Performance Modifications | 0 | 06-11-2010 07:32 AM |
| HKS turbo timer type 1 | Tamago | Performance Modifications | 3 | 07-21-2009 12:59 PM |
Threaded Mode