LED black tail light. - found in HK

[Violin]

Originally Posted by ChinoCharles

This is my call to the wiring boys on this site. You know who you are.

STEP ONE: Buy two of these in the proper length.

http://www.oznium.com/led-flex-strips

STEP TWO: Mount them in the tail light housing in the JDM tail LED position.

STEP THREE: Wire them to the stock brake light assembly.

STEP FOUR: Write a DIY.

Wouldn't work. You need running lights that get brighter when you hit the brakes. The easiest way to do that would be to use one of the numerous LED lights that you see on tractor trailers nowadays. Take your stock tails apart, mount the trailer light in there and wire to a stock light bulb base for easy plug in. Or you could get some Lumined LEDs & resistors and solder up your own.

There's a whole community doing this type of stuff: http://www.hidplanet.com/forums/view...8c2573890494bc