DIY Cruise Control for 2012 Yaris - Good News! - Toyota Yaris Forums

motoman740 · 12-09-2011, 11:33 PM

ok so i took some pictures of the steering wheel:

The air bag is held on by what looks like 3 or 4 clip style bolts. To remove the air bag you have to insert a small screwdriver and push a metal clip that in turn releases the module. There should be 3 or 4 clips. The removal should be a bit tricky since you have to work your way around to get all loose, but the installation is going to be super easy.

the cover is removed easily by inserting a small key/screw driver in the notch and popping it loose.

The gauge cluster already has the markings for the cruise functions but the lights dont turn on when the ignition is put on. This tells me that probably the bulbs are not installed and the hole is empty, or the ecm doesnt have the cruise control programmed... Its probably the lack of bulbs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 07:38 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

12-09-2011, 11:33 PM	#10
motoman740 Drives: 2012 yaris 3 door Join Date: Dec 2011 Location: United States Posts: 4	ok so i took some pictures of the steering wheel: The air bag is held on by what looks like 3 or 4 clip style bolts. To remove the air bag you have to insert a small screwdriver and push a metal clip that in turn releases the module. There should be 3 or 4 clips. The removal should be a bit tricky since you have to work your way around to get all loose, but the installation is going to be super easy. the cover is removed easily by inserting a small key/screw driver in the notch and popping it loose. The gauge cluster already has the markings for the cruise functions but the lights dont turn on when the ignition is put on. This tells me that probably the bulbs are not installed and the hole is empty, or the ecm doesnt have the cruise control programmed... Its probably the lack of bulbs.