1NZ port & polish - Toyota Yaris Forums

Razr · 03-15-2007, 02:36 AM

Let me clarify that a little.. I'd Ebay them and put the money into the "2ZZ-GE engine swap fund".

From everything I've learnt about this engine in the past 2+ years (my last car was a 1NZ-FE as well), it takes mega bucks to make minimal gains.

Our resident sticker guy and all-round good fella eTiMaGo tells me we can get 2ZZ-GE's retrofitted into our Yarii by TRD Thailand for ~100K Baht (USD $2850). Given that the 2ZZ-GE makes 180HP stock, by the time it's in a Yaris with a custom mandrel bent exhaust and intake we should be looking at 200+HP.

There's nothing you can do to a 1NZ-FE for that money that would get remotely close, plus you've got the headroom for forced induction and other mods (if your mother dropped you on your head as a baby, and 200HP in a tiny FWD egg isn't enough)

Anyways, you can see where my thoughts are at

If I could get 4WD and a DSG box to go with a 2ZZ-GE for this thing, I'd order it all tomorrow - along with some blowage, 'cause that'd be a fuckin fun car.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What type of head unit with AUX port?	ebowers83	In Car Entertainment + Electronics (audio / video / alarm)	3	11-06-2006 10:21 AM
ODB-II port location?	eTiMaGo	DIY / Maintenance / Service	6	09-24-2006 12:27 PM
Port A Walls	tomjasz	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	33	09-04-2006 04:20 PM
[Detail] [as to make ] Auto Laudering	Sérgio Barros	Wash, Wax, Detailing, Exterior Repairs	4	08-22-2006 03:56 AM

03-15-2007, 02:36 AM	#11
Razr YRS WHOR View User's Garage Drives: White 2007 Yaris E-Limited 5dr Join Date: Feb 2007 Location: Chiangmai, Thailand Posts: 359	Let me clarify that a little.. I'd Ebay them and put the money into the "2ZZ-GE engine swap fund". From everything I've learnt about this engine in the past 2+ years (my last car was a 1NZ-FE as well), it takes mega bucks to make minimal gains. Our resident sticker guy and all-round good fella eTiMaGo tells me we can get 2ZZ-GE's retrofitted into our Yarii by TRD Thailand for ~100K Baht (USD $2850). Given that the 2ZZ-GE makes 180HP stock, by the time it's in a Yaris with a custom mandrel bent exhaust and intake we should be looking at 200+HP. There's nothing you can do to a 1NZ-FE for that money that would get remotely close, plus you've got the headroom for forced induction and other mods (if your mother dropped you on your head as a baby, and 200HP in a tiny FWD egg isn't enough) Anyways, you can see where my thoughts are at If I could get 4WD and a DSG box to go with a 2ZZ-GE for this thing, I'd order it all tomorrow - along with some blowage, 'cause that'd be a fuckin fun car.