Airbag light won't turn off - Toyota Yaris Forums

r0m4ca3ped · 12-12-2012, 11:44 PM

Scott, appreciate the quick response. I do not understand what squib means. When I took the airbag out, I removed two connectors from it. There was an Orange connector and a black connector. What was interesting to me was that each connector had two pins, these stupid pins were shorted together. What was more interesting was that each pin had different color wires associated with it. Since both the Black connector and Orange connector's had their pins shorted, I thought I must be by design. But it didnt make sense as to why would Toyota use different wire but short them. Are these connectors should NOT have their pins shorted? Should I investigate and remedy the short within these connectors?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0	goku87	DIY / Maintenance / Service	127	02-19-2023 08:01 PM
Help! Airbag light issue	Astroman	DIY / Maintenance / Service	24	05-18-2019 01:35 PM
How many forum posters does it take to change a light bulb?	silver_echo	Off-topic / Other Cars / Everything else Discussions	25	06-27-2011 02:50 AM
passenger airbag light problem (NOT stuck on)	ersheff	General Yaris / Vitz Discussion	3	10-12-2010 09:20 AM
LED'n it out (warning...big pics)	custom Lftback	Photo-Video-Media Gallery	9	05-24-2010 04:41 AM

12-12-2012, 11:44 PM	#10
r0m4ca3ped Drives: 2007 Yaris Join Date: Dec 2012 Location: Orange County Posts: 6	Scott, appreciate the quick response. I do not understand what squib means. When I took the airbag out, I removed two connectors from it. There was an Orange connector and a black connector. What was interesting to me was that each connector had two pins, these stupid pins were shorted together. What was more interesting was that each pin had different color wires associated with it. Since both the Black connector and Orange connector's had their pins shorted, I thought I must be by design. But it didnt make sense as to why would Toyota use different wire but short them. Are these connectors should NOT have their pins shorted? Should I investigate and remedy the short within these connectors?