My build thread! 07 HB - Toyota Yaris Forums

FlushYaris · 12-30-2013, 03:24 AM

Before the flares! Look at that fitment! :D

So this is the final product.

So best DIY for you guys. Is to get 4 small screws and drill inside the bumper and fender. For the FRONTS. You will need to do some plastic welding on the inside as you can see here.

Don't judge me on my plastic welding skills. They look like poop on the inside but who is going to look under there? LOL
NOW for the backs
You will need to plastic weld a bracket on the middle of the inside of the flare.That is where you will put the double sided tape on. Make sure you secure the SH"T out of it or it'll slowly bounce back and forth. LOL

Same thing on the rears to bolt on the inside flares to the bumper. You only need to use 2 one on each side.
THEN BAM!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 Audio Upgrade FAQ and Build Log	muffin_top	In Car Entertainment + Electronics (audio / video / alarm)	19	01-19-2022 06:28 PM
My Build Thread	1.5	Photo-Video-Media Gallery	649	11-18-2014 07:00 AM
Build thread! '08 Yaris Hatch	nimuntak	Photo-Video-Media Gallery	105	01-28-2014 02:28 PM
The open political discussion thread. Read the first post!	eTiMaGo	Off-topic / Other Cars / Everything else Discussions	342	09-15-2009 12:34 AM
Aftermarket rim thread vs official wheel guide	regal	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	04-01-2009 12:11 PM

12-30-2013, 03:24 AM	#11
FlushYaris Drives: 07 yaris 3dr Join Date: Aug 2013 Location: Portland, OR Posts: 87	Before the flares! Look at that fitment! :D So this is the final product. So best DIY for you guys. Is to get 4 small screws and drill inside the bumper and fender. For the FRONTS. You will need to do some plastic welding on the inside as you can see here. Don't judge me on my plastic welding skills. They look like poop on the inside but who is going to look under there? LOL NOW for the backs You will need to plastic weld a bracket on the middle of the inside of the flare.That is where you will put the double sided tape on. Make sure you secure the SH"T out of it or it'll slowly bounce back and forth. LOL Same thing on the rears to bolt on the inside flares to the bumper. You only need to use 2 one on each side. THEN BAM!