 |
 |
|
|
08-10-2014, 01:08 PM
|
#33 |
 Drives: 2011 Yaris RS 5 door 5 spd Join Date: Aug 2012
Location: Toronto, Canada
Posts: 449
|
install
Very easy. Jack up the car and remove the front wheels. Remove the tower brackets from the tanabe bar and and bolt up each bracket on the two strut towers (two bolts per bracket). It gets tight under the wheel well when trying to tighten the bolts up for the brackets but it works if you have the right tools. Then attach the bar to the brackets and adjust and tighten accordingly. Then re install the wheels and drop the car. Then inspect the install and make sure everything is still nice and tight. Then drive and enjoy. Also, after a couple hundred kilometers check everything again and make sure everything is still tight and secure. Its a really easy install with basic tools don't be intimidated by it. But its very important that you do the entire install with the car in the air and the load off of the front wheels.
Good luck! |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Installed the Tanabe Strut bar but had to remove my ground wire kit.. | vacantj | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 6 | 10-01-2007 02:56 PM |
| **NEW ITEM** Tanabe Sustec Front strut bars | C2AUTOSPL | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 5 | 04-27-2007 10:54 PM |
| C-ONE Front Strut Tower Bar - Installed & Impressions (Pics to Come) | bigsky2 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 20 | 01-10-2007 07:53 PM |
| 2006-2007 Yaris 4 Door Front Strut Bar AEM/DC Sport | KenAEM | Performance Modifications | 2 | 10-07-2006 03:26 AM |
| 2006-2007 Yaris 4 Door Front Strut Bar AEM/DC Sport | KenAEM | General Yaris / Vitz Discussion | 3 | 08-30-2006 10:43 PM |
Threaded Mode