lug nut spacing - Toyota Yaris Forums

*kimona* · 07-13-2007, 12:20 PM

I think stock bolts would be just fine with 5mm spacer. More than 5mm's will need longer bolts.

BTW, I wouldn't touch those spacers!

Do yourself a favour and get quality hubcentric spacers... it's worth the extra bucks.

With cheap spacers, you run the risk of vibration at speed... which is all too common.

brickhardmeat · 07-13-2007, 12:24 PM

Quote:

Originally Posted by kimona54

I think stock bolts would be just fine with 5mm spacer. More than 5mm's will need longer bolts.

BTW, I wouldn't touch those spacers!

Do yourself a favour and get quality hubcentric spacers... it's worth the extra bucks.

With cheap spacers, you run the risk of vibration at speed... which is all too common.

I'll check around. I figured the same with 5mm stock would be fine. If you see some 5mm good quality let me know. I did a little looking a around and didn't find however I did see some 10mm. That is a bit much I think.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torquing those Lug Nuts...	Doc Zaius	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	8	07-13-2007 12:19 PM
Cheap Lug Nuts?	KwonSau	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	06-06-2007 12:51 AM
How to remove the Nut on the top of the shock tower	hystria	DIY / Maintenance / Service	29	12-08-2006 09:30 PM
5 lug adapter?	funkstrong	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	8	10-21-2006 04:49 PM
Lug Nuts for Konig Helium Wheels?	OK Yaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	09-19-2006 05:58 PM

07-13-2007, 12:20 PM	#1
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,936	I think stock bolts would be just fine with 5mm spacer. More than 5mm's will need longer bolts. BTW, I wouldn't touch those spacers! Do yourself a favour and get quality hubcentric spacers... it's worth the extra bucks. With cheap spacers, you run the risk of vibration at speed... which is all too common.