Simota CF filter and other goodies - Toyota Yaris Forums

Nabisco · 08-13-2007, 08:30 AM

Looks good! I like that intake design!
An oil catch can is usually to go between the valve cover and intake pipe or PCV valve and intake pipe. It's function is to remove oil and or oil vapor from positive air coming from the valve cover and oil vapor induction in the intake. Usually you don't install these unless you have blow by. I don't have blow by on my engine but I wish to have clean intake. Oil vapor can lower fuel octane significantly.

You can fabricate one for under 20 dollars.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-13-2007, 08:30 AM	#1
Nabisco View User's Garage Drives: '08 Honda Fit Sport Join Date: Aug 2007 Location: Tampa Posts: 45	Looks good! I like that intake design! An oil catch can is usually to go between the valve cover and intake pipe or PCV valve and intake pipe. It's function is to remove oil and or oil vapor from positive air coming from the valve cover and oil vapor induction in the intake. Usually you don't install these unless you have blow by. I don't have blow by on my engine but I wish to have clean intake. Oil vapor can lower fuel octane significantly. You can fabricate one for under 20 dollars.