small+boost=<3 - Toyota Yaris Forums

at3GG · 12-15-2008, 02:06 PM

The closest place to me that I have found wrote me back. Their Emanage certified btw.

The said that "an orignal tune, with no base map would run $550-750( with Emanage or Emanage Ultimate). Because there is no plug and play for your yaris, we will have to build a custom harness etc. This will run basic shop labor costs of $95/ hour"

Anyone who knows.....about how long should it take them to fab up a harness? A day? A week? They should know what their doing so it shouldnt be that difficult correct? I know labor cost is high but thats a LITTLE extreme isnt it?

Tamago · 12-15-2008, 02:37 PM

Quote:

Originally Posted by at3GG

The closest place to me that I have found wrote me back. Their Emanage certified btw.

The said that "an orignal tune, with no base map would run $550-750( with Emanage or Emanage Ultimate). Because there is no plug and play for your yaris, we will have to build a custom harness etc. This will run basic shop labor costs of $95/ hour"

Anyone who knows.....about how long should it take them to fab up a harness? A day? A week? They should know what their doing so it shouldnt be that difficult correct? I know labor cost is high but thats a LITTLE extreme isnt it?

it's not really a harness...

oh, and i was able to wire mine up in about 4 hours. plan on them telling you 10

they'll just tap in and bypass a few of the wires coming into the unit.

for the $$ i'd do the FIC over the ultimate.

12-15-2008, 02:06 PM	#1
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	The closest place to me that I have found wrote me back. Their Emanage certified btw. The said that "an orignal tune, with no base map would run $550-750( with Emanage or Emanage Ultimate). Because there is no plug and play for your yaris, we will have to build a custom harness etc. This will run basic shop labor costs of $95/ hour" Anyone who knows.....about how long should it take them to fab up a harness? A day? A week? They should know what their doing so it shouldnt be that difficult correct? I know labor cost is high but thats a LITTLE extreme isnt it? __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
small fingernail scratches from debadging...	songa	Wash, Wax, Detailing, Exterior Repairs	16	12-15-2008 09:47 PM
Small science fiction story I wrote which includes the Yaris. :)	john21031	Off-topic / Other Cars / Everything else Discussions	3	11-21-2008 12:57 PM
How Small Would You Go?	Nigal	General Yaris / Vitz Discussion	26	06-15-2007 08:44 PM
small 4ch amp. 4x100rms	ben dover	In Car Entertainment + Electronics (audio / video / alarm)	2	04-08-2007 04:17 PM
Small Shift knob	H8SGAS	Items for Sale by private party	3	09-25-2006 07:28 PM