![]() |
|
|
|
|
|
#1 |
![]() ![]() ![]() |
Side marker LED lights
I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.
|
|
|
|
|
|
#2 | |
|
HacKers WanTed!
Drives: Yaris S HB & Yaris S SD Join Date: Aug 2007
Location: Villalba, Puerto Rico
Posts: 435
|
Quote:
__________________
R-CaT Project Yar 2ZR |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY - HID Retrofit | Violin | DIY / Maintenance / Service | 57 | 06-11-2007 06:17 PM |
| Smoke your own tail lights | ChinoCharles | Cosmetic Modifications (Exterior/Interior) | 9 | 01-15-2007 11:00 PM |
| xb side marker swap? | funkstrong | Cosmetic Modifications (Exterior/Interior) | 4 | 10-25-2006 11:32 AM |
| Fog Lights - only right hand side | JayCee | Cosmetic Modifications (Exterior/Interior) | 3 | 09-26-2006 05:44 PM |
| Side Turn Signal Lights | bigsky2 | Cosmetic Modifications (Exterior/Interior) | 15 | 08-24-2006 06:06 PM |