Ideal Spacer Width For the Rear?

[Russelt3hPirate]

hubcentric and hubspacer are two different things.

hubspacer mounts between the hub and the axle spacing the hub 10mm (therefore also the wheel).

a wheel spacer (hubcentric or not) will space out the wheel only.

how are you doing on space between the tire and the fender at full compression?

with our setup at +25mm it's very close to hitting the fender and it does on a rare occasion depending on the severity of the bump.

[tk-421]

Originally Posted by Russelt3hPirate

hubcentric and hubspacer are two different things.

Really? Didn't know that...

how are you doing on space between the tire and the fender at full compression?

I haven't really measured, but something close to an inch. I think I should be fine with 10mm... I'll make some real measurements and post up though.