Installed the 1zz throttle body -

[thebarber]

so you didnt find out the code on the CEL?

[yarstar]

Originally Posted by thebarber

so you didnt find out the code on the CEL?

I don't have a scangauge. The damn CEL came on again! Is there anyway to run this w/o getting a CEL? You can really feel the difference in hp. My car has alot of kick now.

[YarisPR]

Originally Posted by yarstar

I don't have a scangauge. The damn CEL came on again! Is there anyway to run this w/o getting a CEL? You can really feel the difference in hp. My car has alot of kick now.

I used a Generic Scan Tool and the code was P0505 or something like that
But the code was: Idle Malfunction.


On another note

I had the TB installed for more than a month and I do have a CEL, but something weird happened..... On two separate occasions I've started the car (first start of the day) and the CEL was gone. It idle was normal, as if I had the stock TB (it didn't went over 2500rpm). But this lasted only one day (that days). The next day the CEL was back on. But it was nice not seeing the annoying light for at least 24 hours
But it was weird sh*t .....