Question about HID for 07 Yaris - Toyota Yaris Forums

chinoken503 · 04-10-2009, 04:25 AM

What would happen if i get a low beam and i turn on the high beam? Would the HID blow?

Kaotic Lazagna · 04-10-2009, 04:33 AM

Quote:

Originally Posted by chinoken503

What would happen if i get a low beam and i turn on the high beam? Would the HID blow?

There should not be a high beam bulb. So I don't think anything will happen. hehehe. My HID low and halogen Hi has two bulbs. The halogen bulb is right next to the HID bulb, very small, and very useless.

chinoken503 · 04-10-2009, 04:40 AM

So you purchased one of those HI/LO bulbs with an HID low and halogen HI that are fitted right next to each other? So if i get a single beam HID bulb and turn on high beam it should do nothing?

Kaotic Lazagna · 04-10-2009, 05:02 AM

Quote:

Originally Posted by chinoken503

So you purchased one of those HI/LO bulbs with an HID low and halogen HI that are fitted right next to each other? So if i get a single beam HID bulb and turn on high beam it should do nothing?

Well, not necessarily, like the comment above, things just might get dark. Our cars shut off the low beams when the high beams are turned on. On my kit, there are two cables, one for the high and one for the low (HID), so if there is no cable for the high, there will not be a place for the power/wattage to go to/diverted to, so, nothing happens, nothing turns on.

chinoken503 · 04-10-2009, 05:03 AM

hmmm i c, I guess i will have to look and see how my wiring is like.

chinoken503 · 04-10-2009, 05:04 AM

thank you everyone for your advice

AlainMikli · 04-10-2009, 04:52 AM

Quote:

Originally Posted by chinoken503

What would happen if i get a low beam and i turn on the high beam? Would the HID blow?

if you using a single beam HID, if you turn on the High Beam, may be everything will turn off.

my friend's has a fits after install hid, the high beam will turn off everything~

but after some wiring he seems to get rid of it, nothing happen when turn on the high beam~

chinoken503 · 04-10-2009, 04:57 AM

So turning on the high beam will turn off the Low beam HIDs when enabled if i only have a single low beam?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
HID Question!!	MurderCivic	Cosmetic Modifications (Exterior/Interior)	4	01-21-2009 03:29 AM
Question on Yaris wheels	featherz	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	2	10-17-2006 10:27 PM

04-10-2009, 04:25 AM	#1
chinoken503 Drives: Yaris 07 Join Date: Apr 2009 Location: Oregon Posts: 7	What would happen if i get a low beam and i turn on the high beam? Would the HID blow?

04-10-2009, 04:40 AM	#3
chinoken503 Drives: Yaris 07 Join Date: Apr 2009 Location: Oregon Posts: 7	So you purchased one of those HI/LO bulbs with an HID low and halogen HI that are fitted right next to each other? So if i get a single beam HID bulb and turn on high beam it should do nothing?

04-10-2009, 05:03 AM	#5
chinoken503 Drives: Yaris 07 Join Date: Apr 2009 Location: Oregon Posts: 7	hmmm i c, I guess i will have to look and see how my wiring is like.

04-10-2009, 05:04 AM	#6
chinoken503 Drives: Yaris 07 Join Date: Apr 2009 Location: Oregon Posts: 7	thank you everyone for your advice

04-10-2009, 04:57 AM	#8
chinoken503 Drives: Yaris 07 Join Date: Apr 2009 Location: Oregon Posts: 7	So turning on the high beam will turn off the Low beam HIDs when enabled if i only have a single low beam?