Question: alignment setting for a daily drive and track car?

[kngrsll]

Originally Posted by Tamago

-2.2 degrees front camber

0 toe

-1.5rear camber

0 toe

this is nearly what i run, i have a tiny bit of toe in the rear. tire wear is great.

Originally Posted by Loren

Start with 2-2.5 degrees negative camber in front with zero toe or VERY slight toe-in (maybe 1/16"). Leave the rear alignment stock.

but this is probably easier to do :) I wonder how much influence the rear shims i have play on handling. When i did the full alignment, it sure make a huge difference when the car was completely stock.