What filament does the DL running light use?

[Tamago]

Originally Posted by RedRide

Most cars use the high beam at lower voltage for DLRL.

I assume that the Yaris does the same but, i just wanted a definitive answer.
I guess I will still have to wait on this.

1. walk out to your vehicle.
2. turn on vehicle.
3. look to see which filament is lit ;)


heheeh sorry man, it just appeared to be the most definitive solution.

[Sandwash]

On my 2009 daytime running ligts use a separate smaller bulb located apart from the primary bulb - very clever and efficient set-up. Or am is not getting the question?

[Tamago]

Originally Posted by Sandwash

On my 2009 daytime running ligts use a separate smaller bulb located apart from the primary bulb - very clever and efficient set-up. Or am is not getting the question?

i think you're referring to the 'city light' the 194 bulb.

[RedRide]

Originally Posted by Tamago

1. walk out to your vehicle.
2. turn on vehicle.
3. look to see which filament is lit ;)


heheeh sorry man, it just appeared to be the most definitive solution.

Not really. The view of the headlight bulb is obscured by some sort of decroativ/reflective shield.

[Tamago]

Originally Posted by RedRide

Not really. The view of the headlight bulb is obscured by some sort of decroativ/reflective shield.

try removing the bulb on the passenger side?