Request for help: diagramming a relay

[CTScott]

Hmmmmmm.

Try jumping ACC (white pin 2) to IG2 (pink pin 6) instead.

You will still need the ACC cut relay bypass (jumpering 3 to 4) in place, as the ACC cut relay is between the keyswitch and the radio.

[BailOut]

Originally Posted by CTScott

Hmmmmmm.

Try jumping ACC (white pin 2) to IG2 (pink pin 6) instead.

You will still need the ACC cut relay bypass (jumpering 3 to 4) in place, as the ACC cut relay is between the keyswitch and the radio.

This was a difficult one to pull off due to the IG2 wire being a much smaller gauge than pins 1 and 2, but I got 'er done. Still no change. The stereo and instrument panel still cut out during a start.

Thank again for feeding me ideas, though.