GI: "YarGauge" replacement clock module (Digital Tach, etc.) - Page 24 - Toyota Yaris Forums

cali yaris · 08-15-2010, 12:53 AM

Quote:

In the meantime, I am nearing the point where I am going to put out a couple to have people run them and give some feedback.

That is a very good idea.

custom Lftback · 08-15-2010, 07:07 AM

I'll volunteer as well!

PhillyG · 08-15-2010, 08:00 AM

hrmm.. if you need a volunteer in ga.. let me know.

sickpuppy1 · 08-15-2010, 08:44 AM

Volunteer here in the hot Kansas sun.......

swidd · 08-15-2010, 10:02 AM

Volunteer from NE PA. I can drive to your laboratory and make my dash available to you.

Kioshi · 08-15-2010, 12:34 PM

a lot of samplers.

CTScott, whats the duration, (how many miles driving with one) are you are looking at for a through feedback on these?
Since I've already swapped to the RS cluster and have a 1800 mile variation from stock mileage on the car~

ztrack157 · 08-15-2010, 03:59 PM

Shoot I will actually pay as oppose to volunteering

swidd · 08-15-2010, 04:58 PM

I offer a pint of ice cream.

dean_park · 08-15-2010, 06:45 PM

I was "volunteering" to buy and give a review.

CTScott · 08-15-2010, 10:11 PM

What I'll most likely do is install 2-3 in relatively local cars. That way, if they find any issues that require software fixes, I can easily reflash them.

swidd · 08-15-2010, 10:36 PM

So who's moving to Connecticut with me? uuuuhaul!

Lewis · 08-16-2010, 06:01 AM

central NJ close enough Scott?

dean_park · 08-16-2010, 07:34 AM

If it's a serial reflash, I should be able to handle it. I'm a mechanical engineer but I dabble on the sparky stuff.. I do flash firmware on a lot of our equipment and our vendors equipment. I'm also originally from RI (even lived in Middletown CT for a year), so I used to be local....eh, probably doesn't help.
Should I just send my resume for consideration? lol

CTScott · 08-16-2010, 10:13 AM

Quote:

Originally Posted by dean_park

If it's a serial reflash, I should be able to handle it. I'm a mechanical engineer but I dabble on the sparky stuff.. I do flash firmware on a lot of our equipment and our vendors equipment. I'm also originally from RI (even lived in Middletown CT for a year), so I used to be local....eh, probably doesn't help.
Should I just send my resume for consideration? lol

The YarGauge uses two microcontrollers - One for the display and analog inputs and the other for the CAN bus communications. The CAN bus one requires a JTAG interface for programming.

POORSHA · 08-16-2010, 11:01 AM

I live in Dayville ct and am willing and able to be a test subject. Ok not me but my car.

CheapOldGuy_v1.1 · 08-17-2010, 07:05 AM

I'll volunteer! I live one town north of where you bought your car in south central MA. My 08 LB is best 14K I ever spent. I'm also very familiar with the tech side.

Revsson · 08-17-2010, 03:55 PM

Quote:

Originally Posted by CheapOldGuy_v1.1

I'll volunteer! I live one town north of where you bought your car in south central MA. My 08 LB is best 14K I ever spent. I'm also very familiar with the tech side.

Noobs to the back of the line!

j/k

advocate · 08-17-2010, 03:03 PM

Hrmm I'm all the way in california but we use JTAG here at work to program our drives!

View Poll Results: Would you buy one?
No	5	5.10%
Yes (for $75)	46	46.94%
Yes (but it would have to be less than $75)	7	7.14%
Yes (but I still want it to also display the time)	40	40.82%
Voters: 98. You may not vote on this poll

08-15-2010, 07:07 AM	#2
custom Lftback View User's Garage Drives: 2008 Toyota Yaris Liftback Join Date: Oct 2008 Location: Houston, TX Posts: 1,054	I'll volunteer as well! __________________ C-Lift -------------------------------------------------------------- Current Mods: MI Armrest; Full LED conversion (interior and exterior); RS spoiler; Tinted windows; Tanabe DF210 lowering springs; aftermarket door speakers; 12" RF P3 subwoofer with custom box wrapped in Neffy; seat covers; HID 8000K headlights; HID 3000K foglights; 13mm PG hub spacers; muffler delete with dual tip; eyelids; and.. A little red Domo mascot!

08-15-2010, 08:44 AM	#4
sickpuppy1 Drives: 2010 Yaris Sedan Join Date: Feb 2010 Location: Kansas Posts: 871	Volunteer here in the hot Kansas sun....... __________________

08-15-2010, 03:59 PM	#7
ztrack157 Vroom Vroom Beep Beep View User's Garage Drives: Powered Roller Skate Join Date: Oct 2008 Location: Biggs, CA Posts: 404	Shoot I will actually pay as oppose to volunteering __________________ Ever blown out an R-200 diff god know's I have

08-17-2010, 07:05 AM	#16
CheapOldGuy_v1.1 Frugal and middle aged... Drives: 2008 Meteorite Metallic AT LB Join Date: Oct 2008 Location: South Central MA Posts: 1	I'll volunteer! I live one town north of where you bought your car in south central MA. My 08 LB is best 14K I ever spent. I'm also very familiar with the tech side. __________________ ______________________________________

08-15-2010, 08:00 AM	#3
PhillyG Drives: 2009 Yaris Join Date: May 2010 Location: georgia Posts: 91	hrmm.. if you need a volunteer in ga.. let me know.

08-15-2010, 10:02 AM	#5
swidd Drives: Yaris HB Join Date: Jul 2007 Location: Central Alabama, GOD BLESS AMERICA Posts: 755	Volunteer from NE PA. I can drive to your laboratory and make my dash available to you.

08-15-2010, 12:34 PM	#6
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	a lot of samplers. CTScott, whats the duration, (how many miles driving with one) are you are looking at for a through feedback on these? Since I've already swapped to the RS cluster and have a 1800 mile variation from stock mileage on the car~

08-15-2010, 04:58 PM	#8
swidd Drives: Yaris HB Join Date: Jul 2007 Location: Central Alabama, GOD BLESS AMERICA Posts: 755	I offer a pint of ice cream.

08-15-2010, 06:45 PM	#9
dean_park Drives: 2011 VW Golf TDI Join Date: Oct 2009 Location: Wentzville, MO Posts: 191	I was "volunteering" to buy and give a review.

08-15-2010, 10:11 PM	#10
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,450	What I'll most likely do is install 2-3 in relatively local cars. That way, if they find any issues that require software fixes, I can easily reflash them.

08-15-2010, 10:36 PM	#11
swidd Drives: Yaris HB Join Date: Jul 2007 Location: Central Alabama, GOD BLESS AMERICA Posts: 755	So who's moving to Connecticut with me? uuuuhaul!

08-16-2010, 06:01 AM	#12
Lewis Our off road vehicle Drives: 2009 Yaris 3dr Join Date: Apr 2009 Location: NJ Posts: 198	central NJ close enough Scott?

08-16-2010, 07:34 AM	#13
dean_park Drives: 2011 VW Golf TDI Join Date: Oct 2009 Location: Wentzville, MO Posts: 191	If it's a serial reflash, I should be able to handle it. I'm a mechanical engineer but I dabble on the sparky stuff.. I do flash firmware on a lot of our equipment and our vendors equipment. I'm also originally from RI (even lived in Middletown CT for a year), so I used to be local....eh, probably doesn't help. Should I just send my resume for consideration? lol

08-16-2010, 11:01 AM	#15
POORSHA View User's Garage Drives: 2008 LB Join Date: Nov 2008 Location: NE CT Posts: 418	I live in Dayville ct and am willing and able to be a test subject. Ok not me but my car.

08-17-2010, 03:03 PM	#18
advocate Drives: car Join Date: Oct 2008 Location: location Posts: 1,033	Hrmm I'm all the way in california but we use JTAG here at work to program our drives!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
in dash clock as tach?	Cosmonaut	In Car Entertainment + Electronics (audio / video / alarm)	10	07-12-2010 11:27 AM
digital tach, 52mm, preferably blue leds	severous01	Cosmetic Modifications (Exterior/Interior)	5	05-15-2009 10:58 AM
Digital Tach	nqd	Performance Modifications	4	05-17-2007 12:04 PM