 |
 |
|
|
|
|
09-17-2009, 12:23 PM
|
#1 |
|
AD&D Dork
Drives: 07Liftback/07sedanS Join Date: Oct 2008
Location: US-V.A.
Posts: 83
|
Good Review! I just received my Megan coilovers and plan to do the install this weekend. Hopefully I dont run into any huge problems.
__________________
 Mods: K&N filter, Megan Coilovers, Ultra Racing 19mm rear sway bar, Sun tachometer, Window Tint. |
|
|
|
09-17-2009, 04:57 PM
|
#2 | |
  Drives: Yaris Join Date: Oct 2008
Location: Michigan
Posts: 199
|
Quote:
While your at it would you mind telling me what pieces you use off the original suspension. I'm buying "the barber"s and I'm thinking about getting new parts that are reused so they are a "easy swap" as I will probably only run them in the summer. Heck if your feeling ambitious do a Megan specific DIY. |
|
|
|
|
|
09-18-2009, 11:00 AM
|
#3 | |
|
AD&D Dork
Drives: 07Liftback/07sedanS Join Date: Oct 2008
Location: US-V.A.
Posts: 83
|
Quote:
Mojo Jojo from the microimage forums said "You'll need to re-use the stock strut bearing in front. You remove it and press it onto the Megan strut, tighten with stock nut, then put the stock rubber "donut" on. For the rear it's just the dust cover and bumpstop." as for the DIY, I'll see what I can do.
__________________
Mods: K&N filter, Megan Coilovers, Ultra Racing 19mm rear sway bar, Sun tachometer, Window Tint. |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
