![]() |
|
|
|
|
|
#1 |
|
daily driver
|
you can rotate the inlet connections on the tb to match the angle of the 1nzfe throttle body
__________________
Last edited by thebarber; 10-07-2009 at 05:28 PM. |
|
|
|
|
|
#2 |
|
★weeaboo★
|
The Yaris throttle only opens to 80% at WOT IIRC, so anything of a larger diameter will be limited as well, although you're increasing the amount of air to the engine regardless.
My 1ZZ TB has been on for over 5,000 miles with no issues. No chip swap, I just let the ECU do it's thang. No CEL either, although I had one initially so it might have gotten tired of displaying it on the cluster. ![]() I have a high idle like tk when cold, (2.5K) but it goes away when the engine warms up. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Installed the 1zz throttle body - | AlexNet0 | DIY / Maintenance / Service | 135 | 08-01-2014 08:57 AM |
| FS: 1ZZ throttle body and Fujita intake | mrbond | Items for Sale by private party | 25 | 09-08-2009 11:21 PM |
| Intake to match the 1ZZ throttle body | fuji | DIY / Maintenance / Service | 2 | 06-17-2009 11:02 PM |
| Intake for the 1ZZ throttle body? | fuji | Performance Modifications | 9 | 06-14-2009 01:02 AM |
| For Sale: 1ZZ Throttle Body and 0.25" aluminum wheel spacers | m911gt | Items for Sale by private party | 6 | 04-25-2009 09:52 PM |