![]() |
|
|
|
|
|
#1 |
![]() Drives: 2009 Yaris Liftback S Join Date: Jun 2009
Location: Champaign, IL
Posts: 17
|
hi. i'm about to install an underdrive pulley tomorrow morning and was reading over the diy from the other site. there mentions a tic tac sized dowel that makes me slightly nervous. was wondering if i could get one ahead of time just in case i lose this from napa or the dealer and what it might be called there. thanks in advance!
Brian. |
|
|
|
|
|
#2 | |
![]() ![]() ![]() ![]() ![]() Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
|
|
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: 07 Sedan - 5 Speed Manual Join Date: May 2006
Location: Pomona / Pasadena, California
Posts: 337
|
I just got the CR-Lite Pulley Set installed. Great product. Butt dyno says there's some gains in HP. Also, seems to me that it revs quicker. Oh btw, they were the BLUE pulley's I bought from a board member.
|
|
|
|
|
|
#4 | |
![]() ![]() ![]() ![]() ![]() Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
Wow! Blue ones were made for a very short time, they're pretty rare. Thanks again for the review and the kind words, good luck with all your projects! |
|
|
|
|
|
|
#5 |
|
aka Jack Wolfskin
|
I have the 10% underdrive crankpulley on my 1.8 TS and it's a very,very great mod. Feels like a lot more horsepower.
|
|
|
|
|
|
#6 | |
![]() ![]() ![]() ![]() ![]() Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
|
|
|
|
|
|
|
#7 |
![]() ![]() ![]() Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Hi guys, i just installed the underdrive pully on my auto yaris!
On first test drive right after installing, i felt the engine idling is smoother. As i slowly accelerate to move off, i can feel the engine is having less "load" than before! Now when i tried to apply more harder throttle, immediately the engine downshift and rev to the near the redline easily and happily!!!!! ![]() All in all, the underdrive pully is giving me better low-mid range power! ![]() P.S. I will like to take this chance to special thanks to Garm for his fast response on email, lighting fast shipping & nicely bubble wrap the pulley to ensure pulley is all round protected from any mis-handling by postman. Kudos to you, Garm!!
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|