![]() |
|
|
|
|
|
#1 |
|
Banned
|
for soem reason yaris' can take curbs no problem, i jumped a curb doing about 35-40 mph and i have no damage, and my car is lowered with rims, no damage at all +D
|
|
|
|
|
|
#2 |
![]() ![]() Drives: 1997 Yaris LE Join Date: Jan 2009
Location: Ontario, Canada
Posts: 48
|
How high was the curb? It must have felt like you hit a wall. It did with me, and I wasn't going as fast as that.
|
|
|
|
|
|
#3 |
|
Banned
|
curb was about 4 inches high, yea it scared the crap out of me it was pitch black out and i didn't see it switching lanes lol pulled over right away and no damange, bumper was perfect, no scratches, rims were straight, no leaks, nada
|
|
|
|
|
|
#4 |
![]() ![]() Drives: 1997 Yaris LE Join Date: Jan 2009
Location: Ontario, Canada
Posts: 48
|
Unfortunately it did damage the engine under cover on mine (as shown in my pictures). I undid the bolts and popped the dents out of it, but the plastic still seems out of shape between the bolts, as if it's been stretched.
|
|
|
|
|
|
#5 |
![]() ![]() Drives: 1997 Yaris LE Join Date: Jan 2009
Location: Ontario, Canada
Posts: 48
|
New pictures after my "repair":
Looks okay from the front now. In this one, you can see the plastic still bunched (although not as bad as before) between the two bolts. It obviously got stretched when it impacted the curb. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Got hit at work today, lady drove off. | Prohibit | General Yaris / Vitz Discussion | 41 | 11-04-2009 11:38 PM |
| Drove in tar! | Cutie Pie #2 | Wash, Wax, Detailing, Exterior Repairs | 18 | 10-13-2009 02:45 AM |
| Drove home from work with a damaged belt and... | AznGouki | DIY / Maintenance / Service | 44 | 09-07-2009 02:08 AM |
| Test drove Fit, Versa and Yaris... Bought a Yaris! | AlexK | General Yaris / Vitz Discussion | 49 | 09-10-2007 05:35 PM |
| I finally test drove a Yaris Hatch... | ECHOKnight2000 | New YARIS Purchase Forum | 10 | 02-01-2007 12:18 PM |