Exhaust is ready! - Toyota Yaris Forums

DTM_Yaris · 01-06-2007, 07:54 PM

Normally I polish the piping slightly, but for my car I chose not too.
The first resonator would be replaced by a high flow cat, unlike my setup.
Let me know if anyone has any questions.

*Chris07LB* · 01-06-2007, 08:33 PM

So at the tail end, there will still be a flange at the stock angle, so as to bolt up the stock, or better yet, TRD high flow muffler?

DTM_Yaris · 01-06-2007, 09:11 PM

Quote:

Originally Posted by Chris07LB

So at the tail end, there will still be a flange at the stock angle, so as to bolt up the stock, or better yet, TRD high flow muffler?

Yes any production axle back will fit as well.

punch · 01-07-2007, 04:16 AM

Quote:

Originally Posted by DTM_Yaris

Normally I polish the piping slightly, but for my car I chose not too.
The first resonator would be replaced by a high flow cat, unlike my setup.
Let me know if anyone has any questions.

sedan with highflow would be nice...

DTM_Yaris · 01-07-2007, 07:47 AM

Quote:

Originally Posted by punch

sedan with highflow would be nice...

If I can find someone close to come in one day I'll make one for them as well.
We are located in Dulles Virginia

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujitsubo Exhaust!!	MC-BPT	Sponsors Classifieds Area	17	11-16-2006 10:36 AM
Performance exhaust systems for yaris	aucorium	Performance Modifications	6	08-16-2006 08:12 AM
Exhaust --	Ziv	General Yaris / Vitz Discussion	1	02-06-2006 12:57 PM

01-06-2007, 07:54 PM	#1
DTM_Yaris Turbo Yaris Drives: 07 PW Yaris Join Date: Dec 2006 Location: Dulles, VA Posts: 82	Normally I polish the piping slightly, but for my car I chose not too. The first resonator would be replaced by a high flow cat, unlike my setup. Let me know if anyone has any questions.

01-06-2007, 08:33 PM	#2
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	So at the tail end, there will still be a flange at the stock angle, so as to bolt up the stock, or better yet, TRD high flow muffler?