Yaris Sedan Deadening and Sound system upgrade

[derickveliz2]

Originally Posted by talnlnky

Yeah, I remember putting one or two layers on the console area as well.

Not there yet, all that area scares me, same for the headliner.




.

[talnlnky]

Originally Posted by derickveliz2

Not there yet, all that area scares me, same for the headliner.




.

I've never done a headliner... and don't even know if it's worth my time in the yaris... such a small roof, and it's slightly curved. When it rains, I hear the noise coming from the drops hitting the windshield, not from the roof.

[derickveliz2]

Originally Posted by talnlnky

I've never done a headliner... and don't even know if it's worth my time in the yaris... such a small roof, and it's slightly curved. When it rains, I hear the noise coming from the drops hitting the windshield, not from the roof.

"Sqcomp" is going to do it, I hope he is going to show us how to do it, in my case I would like to do it and I only need to apply a few CLD Tiles to control the resonance of the roof, so I guess I don't have to take it all off, just loose it up on the edges 1 at a time to reach the flat areas of sheet metal and I'll be done.

As I'm writing here I'm building my cabin air filter


.

[derickveliz2]

Originally Posted by derickveliz2

As I'm writing here I'm building my cabin air filter

Done! 2 new filters in 20 minutes. (most of the time looking for tools and materials ... Yeah!!!

Back to deadening "Tonight"

.

[talnlnky]

Originally Posted by derickveliz2

Done! 2 new filters in 20 minutes. (most of the time looking for tools and materials ... Yeah!!!

Back to deadening "Tonight"

.

you know.... i really like this thread... and i like your energy too.
What'd you end up using to make your filter?
I changed out my oil filter yesterday... I put it on a lil tight last time (didn't use a wrench, thought it would come off easier). Was amazed at how little oil I lost, I actually didn't need to add anymore oil as the dipstick read I was just barely below the full mark. I'll check it again in a week to make sure it doesn't change.

[derickveliz2]

Originally Posted by talnlnky

you know.... i really like this thread... and i like your energy too.
What'd you end up using to make your filter?

Thanks!
It's 3:23 am and I'm tired, if my wife takes a peak inside my car now, she is going to kill me!

The fire wall its going to be hard, same for the center console, LOTS OF WORK and little time...

For the cabin air filter... I was at work I went to the mechanical room and I saw many boxes of HVAC filters, there was one with a big dent on one side, I cut it to size and then finished with aluminum tape..

Time to go to bed...

.