Pic request would be a BIG help. - Toyota Yaris Forums

Billiam · 03-30-2010, 10:33 PM

I was wondering if someone running this set up could link or post up some pix of their ride. I've been through all the pic threads....but still need more help deciding what it'll look like and whether I'll have any problems with rubbing.

Ideally this will be my setup:

TRD Springs
Wheels - 15x6, +39mm offset
Tires - 205/55

I don't want to run a 195/55 or a 205/50 and the wheels and springs are already ordered....so I can't change that.

Thanks in advance.

AlexNet0 · 03-30-2010, 10:37 PM

PM Tamago

*tk-421* · 03-30-2010, 10:49 PM

You should be fine with that setup. I have 205/50R15 (a bit less than OEM diameter) +38 6.5" lowered. No rubbing at all. 205/55 is closer to OEM diameter, so you should still be OK. As far as looks/stance, they'll look great. You may want to consider 10mm rear wheel spacer for pure flush goodness (maybe 13mm on a 6" wheel? not sure).

derickveliz2 · 03-30-2010, 11:00 PM

I don't know if you have done this on line

But helps a lot to visualize what you are trying to accomplish.

not really pictures but looks like you are going to be OK. and like tk-421 says a 10mm spacer wouldn't hurt.

As soon as you have your car lowered just take a close look between tires and wheel wells.
.

.

thepoche · 03-30-2010, 11:14 PM

15x6 +38mm with 205/50 and dropped 35mm.

I don't remember whats the drop on the TRDs but it should be close to what i have.

Never had any rubbing issue. The only thing is, 205 is a lot larger than a 6 inch wheel so they look pinched.

derickveliz2 · 03-31-2010, 01:40 AM

Very nice thepoche, If I had to do it all over again, that is how it would look like! Nice ride!

Billiam · 03-31-2010, 08:01 PM

Thanks for the info fellas. And yes, I played with that calculator until my fingers bled. Anyone else who wants to post up pix...please feel free. I'll keep ya posted on what I come up with in the near future.

Billiam · 04-16-2010, 07:00 PM

Well...I went ahead and pulled the trigger on a set of ContiExtremeContacts in a 205/55 size.

Hope it all comes together as planned.

Billiam · 04-21-2010, 09:07 PM

Wheels and tires are on. Pix will follow soon, I promise.

Final specs: 15x6, +39mm o/s, 205/55 tire.

I'm sitting on TRD springs and thus far have no rubbing issues. We'll see though.

Billiam · 05-09-2010, 01:07 AM

Been almost 3 weeks. No issues of any kind!

SLIK4 · 05-09-2010, 09:29 PM

looks really good

Billiam · 05-11-2010, 09:16 PM

Quote:

Originally Posted by SLIK4

looks really good

Thanks.

03-30-2010, 10:33 PM	#1
Billiam View User's Garage Drives: '10 White Yaris 4D LB Join Date: Mar 2010 Location: USA Posts: 575	Pic request would be a BIG help. I was wondering if someone running this set up could link or post up some pix of their ride. I've been through all the pic threads....but still need more help deciding what it'll look like and whether I'll have any problems with rubbing. Ideally this will be my setup: TRD Springs Wheels - 15x6, +39mm offset Tires - 205/55 I don't want to run a 195/55 or a 205/50 and the wheels and springs are already ordered....so I can't change that. Thanks in advance.

03-30-2010, 10:37 PM	#2
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	PM Tamago __________________ ---------- MI-YW ----------

03-30-2010, 10:49 PM	#3
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	You should be fine with that setup. I have 205/50R15 (a bit less than OEM diameter) +38 6.5" lowered. No rubbing at all. 205/55 is closer to OEM diameter, so you should still be OK. As far as looks/stance, they'll look great. You may want to consider 10mm rear wheel spacer for pure flush goodness (maybe 13mm on a 6" wheel? not sure). __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

03-31-2010, 01:40 AM	#6
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Very nice thepoche, If I had to do it all over again, that is how it would look like! Nice ride! __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2010, 11:14 PM	#5
thepoche View User's Garage Drives: Toyota Yaris CE Join Date: Sep 2007 Location: Montreal Posts: 56	15x6 +38mm with 205/50 and dropped 35mm. I don't remember whats the drop on the TRDs but it should be close to what i have. Never had any rubbing issue. The only thing is, 205 is a lot larger than a 6 inch wheel so they look pinched.

03-31-2010, 08:01 PM	#7
Billiam View User's Garage Drives: '10 White Yaris 4D LB Join Date: Mar 2010 Location: USA Posts: 575	Thanks for the info fellas. And yes, I played with that calculator until my fingers bled. Anyone else who wants to post up pix...please feel free. I'll keep ya posted on what I come up with in the near future.

04-16-2010, 07:00 PM	#8
Billiam View User's Garage Drives: '10 White Yaris 4D LB Join Date: Mar 2010 Location: USA Posts: 575	Well...I went ahead and pulled the trigger on a set of ContiExtremeContacts in a 205/55 size. Hope it all comes together as planned.

04-21-2010, 09:07 PM	#9
Billiam View User's Garage Drives: '10 White Yaris 4D LB Join Date: Mar 2010 Location: USA Posts: 575	Wheels and tires are on. Pix will follow soon, I promise. Final specs: 15x6, +39mm o/s, 205/55 tire. I'm sitting on TRD springs and thus far have no rubbing issues. We'll see though.

05-09-2010, 01:07 AM	#10
Billiam View User's Garage Drives: '10 White Yaris 4D LB Join Date: Mar 2010 Location: USA Posts: 575	Been almost 3 weeks. No issues of any kind!

05-09-2010, 09:29 PM	#11
SLIK4 Michael Drives: 07 Silver Yaris Sedan Join Date: May 2007 Location: Clearwater, Kansas Posts: 281	looks really good

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pic request: Canadian & EU roof rack	SmellyTofu	Photo-Video-Media Gallery	11	04-03-2010 04:49 AM
Pic Request: Wiper Cowl Removed	Sodium Duck	DIY / Maintenance / Service	2	07-07-2009 12:23 AM
Pic Request: Wedge Engineering brackets	kustom play	Cosmetic Modifications (Exterior/Interior)	11	06-11-2009 07:37 PM
PIC REQUEST - Sedans with Nitto exhaust	darkmoon87	Performance Modifications	23	03-31-2009 05:18 PM
Pic Request: Scangauge mounted in pocket under single din CD player?	nebulight	In Car Entertainment + Electronics (audio / video / alarm)	1	04-29-2007 07:56 PM