2010 Yaris lift

[CTScott]

I made my own custom 4" lift kit for Crashy. I needed it to offset for the compression of the front springs due to the weight of the plow and plow frame.


Lift.jpg

Crashy - Pile.jpg

[Got Mine]

Originally Posted by CTScott

I made my own custom 4" lift kit for Crashy. I needed it to offset for the compression of the front springs due to the weight of the plow and plow frame.


Attachment 33778

Attachment 33779

I saw your lift, What if you hit a solid bump at speed.
I can see the strut towers bending at your lift kit plates.

[CTScott]

Originally Posted by Got Mine

I saw your lift, What if you hit a solid bump at speed.
I can see the strut towers bending at your lift kit plates.

I think the struts would punch through the top of the tower before anything would bend. I used 1/4" thick plate for the plates and I bored solid round bar stock to make the spacers.