Yaris Sedan Deadening and Sound system upgrade

[sqcomp]

Derick, sorry brother...I've been working long nights. Okay, the P99 (the US version) is switching from the white contrast to the black contrast sceens. My P-01 did the same thing. This happens after you've reset the piece.

What you need to do is to turn the tuner off. Then press the function button. You'll go through a setup menu. Your option to change the contrast will be offered on one of those menus. You also have an option to turn off the remote, to change the lighting color, etcetera.

I don't see the need for a fuse between the alternator and the battery. I do see a need for a fuse from the positive back to the amplifiers though.

As for the Voltage, we're seeing normal operation. There's no dips or peaks in my operation.

Remember...gain match!

[derickveliz2]

Originally Posted by sqcomp

Derick, sorry brother...I've been working long nights. Okay, the P99 (the US version) is switching from the white contrast to the black contrast sceens. My P-01 did the same thing. This happens after you've reset the piece.
What you need to do is to turn the tuner off. Then press the function button. You'll go through a setup menu. Your option to change the contrast will be offered on one of those menus. You also have an option to turn off the remote, to change the lighting color, etcetera.
I don't see the need for a fuse between the alternator and the battery. I do see a need for a fuse from the positive back to the amplifiers though.
As for the Voltage, we're seeing normal operation. There's no dips or peaks in my operation.
Remember...gain match!

No problem SQcomp I'll try to change the the settings and set the contrast, I'll let you know.


I was looking for a fuse because of this post above...

Originally Posted by Bluevitz-rs

That connection to the alternator should have a 100A fusible link in it. Otherwise if something shorts out in the alternator, you could have a fire on you hands.

so I don't really need it, OK I'm fine. I do have a fuse for the amps and I have a distribution block with smaller fuses one for each amp.


Ok, this one I'm clue less... how do I do gain match?

Thanks
Derick

[derickveliz2]

Originally Posted by sqcomp

What you need to do is to turn the tuner off. Then press the function button. You'll go through a setup menu. Your option to change the contrast will be offered on one of those menus. You also have an option to turn off the remote, to change the lighting color, etcetera.

Done! Thanks sqcomp, this HU is very special I bet your's it's a little harder with no English, I tried Spanish a little bit but the translation was terrible, so went back to English

You are not going to believe me, I couldn't find BASS & TREBLE in my HU

Just kidding... I don't think there is such a thing on the P99

Thanks again, going back to study the manual for more information