HELP! Interior Light Color Change Seedo broke - Toyota Yaris Forums

chilly79 · 10-07-2010, 12:43 PM

I was going to take it apart tonight to see if I could figure out what I did to the speedo. I thought I got it on there right though.

The LCD was my issue. It seems to be connected to the PCB directly. It looks like I could lift the LCD up and slide the it through the white housing when I pull off the PCB. I was not sure though and thought that this might break it.

So are you saying that I need to remove the odo LCD from the front after I pull off the overlay?

I hope this works I would really like to be able to fix this instead of getting a new one. I saw all the threads about mileage issues after changing a cluster that I would rather avoid.

CTScott · 10-07-2010, 12:46 PM

Quote:

Originally Posted by chilly79

I was going to take it apart tonight to see if I could figure out what I did to the speedo. I thought I got it on there right though.

The LCD was my issue. It seems to be connected to the PCB directly. It looks like I could lift the LCD up and slide the it through the white housing when I pull off the PCB. I was not sure though and thought that this might break it.

So are you saying that I need to remove the odo LCD from the front after I pull off the overlay?

I hope this works I would really like to be able to fix this instead of getting a new one. I saw all the threads about mileage issues after changing a cluster that I would rather avoid.

Yes - The LCD pulls out from the front once it overlay is removed.

chilly79 · 10-07-2010, 12:59 PM

Quote:

Originally Posted by CTScott

Yes - The LCD pulls out from the front once it overlay is removed.

Thanks I will try this when I get home.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-07-2010, 12:43 PM	#1
chilly79 Drives: 09, 3dr, LB, Carmine Red Join Date: Oct 2010 Location: Plano, Texas Posts: 14	I was going to take it apart tonight to see if I could figure out what I did to the speedo. I thought I got it on there right though. The LCD was my issue. It seems to be connected to the PCB directly. It looks like I could lift the LCD up and slide the it through the white housing when I pull off the PCB. I was not sure though and thought that this might break it. So are you saying that I need to remove the odo LCD from the front after I pull off the overlay? I hope this works I would really like to be able to fix this instead of getting a new one. I saw all the threads about mileage issues after changing a cluster that I would rather avoid.