DIY Cruise Control on 07-08 Yaris (step by step)

[cicici00]

Hello all,

I hope my question isn't stupid. I have been reading all the forum hours and hours. They are kind of confusing. BTW, I have 08 Yaris LB.

So, I ordered a cruise stalk from here:
http://cgi.ebay.com/ebaymotors/TOYOT...Q5fAccessories

I understand that I can just "combine" the "DIY cruise control 07-08 with button" and "OEM stalk 2009", then everything should work magically.

Here are my questions:
1. So, the stalk I purchased from eBay could be just substituted as the switches in "DIY cruise control 07-08", right??
2. If Question 1 is a yes, then how do I know which wire from the stalk goes where?
3. Do I need to get any other parts besides the stalk?

[CTScott]

Originally Posted by cicici00

Hello all,

I hope my question isn't stupid. I have been reading all the forum hours and hours. They are kind of confusing. BTW, I have 08 Yaris LB.

So, I ordered a cruise stalk from here:
http://cgi.ebay.com/ebaymotors/TOYOT...Q5fAccessories

I understand that I can just "combine" the "DIY cruise control 07-08 with button" and "OEM stalk 2009", then everything should work magically.

Here are my questions:
1. So, the stalk I purchased from eBay could be just substituted as the switches in "DIY cruise control 07-08", right??
2. If Question 1 is a yes, then how do I know which wire from the stalk goes where?
3. Do I need to get any other parts besides the stalk?

1. Yes.

2. It actually doesn't matter which of the two goes to the ECM pin 40 and which goes to ground.

3. Yes. You need a repair pin for the ECM and one for the connector under the steering column. See this thread for the details:

http://www.yarisworld.com/forums/sho...ght=cruise+faq

[CB900F2]

Hi Scott.. I priced out the two repair kits for the connectors (82998-24250, 82998-12870), and man they are pricey.. They are $11.98 each. Do you know what comes in the kit for $11.98?

Originally Posted by CTScott

1. Yes.

2. It actually doesn't matter which of the two goes to the ECM pin 40 and which goes to ground.

3. Yes. You need a repair pin for the ECM and one for the connector under the steering column. See this thread for the details:

http://www.yarisworld.com/forums/sho...ght=cruise+faq

[CTScott]

Originally Posted by CB900F2

Hi Scott.. I priced out the two repair kits for the connectors (82998-24250, 82998-12870), and man they are pricey.. They are $11.98 each. Do you know what comes in the kit for $11.98?

A little piece of wire with the pin attached is all that you get for $12. I recently bought the parts so that I can offer the 3 pin/wire set for $10 shipped.