PETERPOOP's Turbo Build Thread.

[cali yaris]

Charles has his going into the Zage pan with no issues.

[Focus_Sh1ft]

Originally Posted by cali yaris

Charles has his going into the Zage pan with no issues.

Hmm.. Is he using thicker than a -8 AN line? Also possible his banjo bolt has a smaller restricter I guess.

cdydjded, your return is setup just like PETERPOOP's at this point, right? No line on the inside of the block running down into the oil?

Originally Posted by cdydjded

I look at it this way, if you looked at 1000 turbocharged cars Im sure 99% of them have the oil return above the oil line....

I'm inclined to agree. I can't see how hot oil hitting air would cause foaming. If that were the case, oil dripping down from the cylinder walls would foam, as well as the hot oil sitting in the pan...