one down, one to go - Toyota Yaris Forums

thebarber · 11-14-2010, 10:54 PM

got some time this afternoon while my daughter was napping in the car....finally put in one of the projector lenses in the oem yaris housing

went together relatively easy....

severous01 · 11-14-2010, 11:27 PM

very nice. i'd thought about it but the cut-off line from the factory is very smooth and looks awesome even with halogens.

Tylermayer · 11-15-2010, 02:30 AM

where do you get the halo

thebarber · 11-15-2010, 05:41 PM

Quote:

Originally Posted by Tylermayer

where do you get the halo

i sell them (and HID kits and LED's)...

yaris2010RS · 11-16-2010, 03:35 AM

no now u can sell me mine and help with the install?

thebarber · 11-16-2010, 12:51 PM

Quote:

Originally Posted by yaris2010RS

no now u can sell me mine and help with the install?

sure, sending PM now...

derickveliz2 · 11-16-2010, 12:57 PM

Would you have a DIY? to share with Yaris World?

Kaotic Lazagna · 11-16-2010, 04:20 PM

Hey Adam, is that the bolt-on projector kit? If so, I think you may have installed it incorrectly. The cut-off is going to be vertical instead of horizontal. I'm thinking this because of where the LED's for the halo is located. They should be at the bottom of the ring, but in your picture, they are facing to the left of the headlight.

?????

thebarber · 11-17-2010, 11:10 AM

Quote:

Originally Posted by Kaotic Lazagna

Hey Adam, is that the bolt-on projector kit? If so, I think you may have installed it incorrectly. The cut-off is going to be vertical instead of horizontal. I'm thinking this because of where the LED's for the halo is located. They should be at the bottom of the ring, but in your picture, they are facing to the left of the headlight.

?????

the bottom of the halo ring is pointing down

i actually installed them upside down to begin with just from taking the projector apart to look at it....

what i am doing to check the beam direction is shining an led flashlight i have thru the back of the lense....so its set up correctly, trust me.

you just have the orientation of the headlight wrong in your mind. the bottom of the headlight is the bottom left of the pic....

redglare45 · 11-17-2010, 01:31 PM

Quote:

Originally Posted by derickveliz2

Would you have a DIY? to share with Yaris World?

Yes +1 on what Derick said.

How did you get them to sit "flush" towards the back of the housing? They look really good.

Kaotic Lazagna · 11-18-2010, 02:39 AM

My bad. lol, explained on MI. hahahaha. That angle just makes it look like a sedan headlight or a LB headlight laying on its side.

thebarber · 11-18-2010, 08:12 PM

Quote:

Originally Posted by Kaotic Lazagna

My bad. lol, explained on MI. hahahaha. That angle just makes it look like a sedan headlight or a LB headlight laying on its side.

no worries

thebarber · 11-21-2010, 06:10 PM

test fit the new projectors today

time to seal them up now....both work

mrrock · 11-22-2010, 08:47 PM

good job, are they a marked improvement over the stock light with better bulbs? how long did the whole job take you. do you sell and do the work.
only reason I ask is that I'm in St Clements several times a year

thebarber · 11-22-2010, 11:37 PM

ok, got a second wind tonight after a pb&j, so i sealed the lights up.....went together much easier than i expected.....the lenses just popped back into the clips without issue....i really though i was going to have to bungee cord the backs and fronts together.

Betrivent · 11-23-2010, 02:01 AM

Nice. Did you have to dremel the inside of the housing for the projector to fit?

thebarber · 11-23-2010, 09:00 AM

Quote:

Originally Posted by Betrivent

Nice. Did you have to dremel the inside of the housing for the projector to fit?

yes.

i had to cut off all of the brackets that normally hold the H4 bulb and bore out the hole a bit to fit the projector

47_MasoN_47 · 11-30-2010, 10:19 AM

Looks good, I'd like to get some projectors at some point but I'm afraid to commit lest I mess up something.

11-14-2010, 10:54 PM	#1
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	one down, one to go got some time this afternoon while my daughter was napping in the car....finally put in one of the projector lenses in the oem yaris housing went together relatively easy.... __________________

11-15-2010, 02:30 AM	#3
Tylermayer View User's Garage Drives: 2007 Toyota Yaris Join Date: May 2010 Location: Snohomish, WA Posts: 291	where do you get the halo __________________

11-16-2010, 03:35 AM	#5
yaris2010RS View User's Garage Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009 Location: Angus, Ontario Posts: 1,891	no now u can sell me mine and help with the install? __________________ If it has boobs or wheels sooner or later your gonna have problems with it

11-16-2010, 12:57 PM	#7
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Would you have a DIY? to share with Yaris World? __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

11-21-2010, 06:10 PM	#13
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	test fit the new projectors today time to seal them up now....both work __________________

11-14-2010, 11:27 PM	#2
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	very nice. i'd thought about it but the cut-off line from the factory is very smooth and looks awesome even with halogens.

11-16-2010, 04:20 PM	#8
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Hey Adam, is that the bolt-on projector kit? If so, I think you may have installed it incorrectly. The cut-off is going to be vertical instead of horizontal. I'm thinking this because of where the LED's for the halo is located. They should be at the bottom of the ring, but in your picture, they are facing to the left of the headlight. ?????

11-18-2010, 02:39 AM	#11
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	My bad. lol, explained on MI. hahahaha. That angle just makes it look like a sedan headlight or a LB headlight laying on its side.

11-22-2010, 08:47 PM	#14
mrrock View User's Garage Drives: yaris 2dr hatch Join Date: Oct 2006 Location: ct Posts: 66	good job, are they a marked improvement over the stock light with better bulbs? how long did the whole job take you. do you sell and do the work. only reason I ask is that I'm in St Clements several times a year

11-22-2010, 11:37 PM	#15
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	ok, got a second wind tonight after a pb&j, so i sealed the lights up.....went together much easier than i expected.....the lenses just popped back into the clips without issue....i really though i was going to have to bungee cord the backs and fronts together. __________________

11-23-2010, 02:01 AM	#16
Betrivent Not quite a noob Drives: e46 325 Join Date: Jul 2009 Location: edmonton Posts: 1,408	Nice. Did you have to dremel the inside of the housing for the projector to fit?

11-30-2010, 10:19 AM	#18
47_MasoN_47 What I thought I'd do was View User's Garage Drives: 09 Yaris Sedan Join Date: Aug 2009 Location: Northwest Alabama Posts: 1,140	Looks good, I'd like to get some projectors at some point but I'm afraid to commit lest I mess up something. __________________ My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode