Remote Start DIY Wiring Guide 2006-2010 Yaris

[CTScott]

Originally Posted by hatch2008

ok so i did have everything connected correctly as i check it over 100 times lol , and i have found and fixed my problem, after finding all my wires connected properly and speaking to scott too assure i had them connected propery, thanks a milllion scott really appricate it, i decided to open up the prostart control unit and make sure nothing seemed out of place , what i found was that two of my pins for my bypass in the prostart unit where not even soldered to the circuit board. i exchanged the unit at my local store, plugged in the new one, programmed it and the remote start worked like a charm. jus thought i would post this incase some else has a similar problem, sometimes you may be doing it right but the brand new part is faulty. thanks again scott

Wow! That was a good (bad) find. It is amazing how poor quality control is on so many products these days.

[Shinare]

Originally Posted by CTScott

Wow! That was a good (bad) find. It is amazing how poor quality control is on so many products these days.

Wow, was this thing made in the USA or something? :D


(I keeeed)