DIY Cruise Control FAQ (2006-2010 Yaris) - Toyota Yaris Forums

teddy · 12-28-2010, 10:16 AM

Ok I have my OEM stalk mounted but do not have the necessary cables hooked up to actually make it work yet.

Is there anyone out there who has done this on an 06-08 that can help me out?

I have the ECM repair terminal and spiral connector repair terminals (thanks scott!). The only part I've figured out is where to connect the spiral connector terminals on the connector D3. I don't know where these connect to on the other end, nor where I use the ECM repair terminal.

I've been using Vince87's DIY guide guide for this part, but unfortunately I really don't know what I'm doing when I get past the plug & play connectors!

CTScott · 12-28-2010, 10:34 AM

Quote:

Originally Posted by teddy

Ok I have my OEM stalk mounted but do not have the necessary cables hooked up to actually make it work yet.

Is there anyone out there who has done this on an 06-08 that can help me out?

I have the ECM repair terminal and spiral connector repair terminals (thanks scott!). The only part I've figured out is where to connect the spiral connector terminals on the connector D3. I don't know where these connect to on the other end, nor where I use the ECM repair terminal.

I've been using Vince87's DIY guide guide for this part, but unfortunately I really don't know what I'm doing when I get past the plug & play connectors!

This should help with installing the ECM Pin:

http://www.yarisworld.com/forums/sho...hlight=ecm+pin

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 11:12 PM

12-28-2010, 10:16 AM	#1
teddy Drives: 2008 5-door hatchback Join Date: Oct 2008 Location: Ontario, Canada Posts: 140	Ok I have my OEM stalk mounted but do not have the necessary cables hooked up to actually make it work yet. Is there anyone out there who has done this on an 06-08 that can help me out? I have the ECM repair terminal and spiral connector repair terminals (thanks scott!). The only part I've figured out is where to connect the spiral connector terminals on the connector D3. I don't know where these connect to on the other end, nor where I use the ECM repair terminal. I've been using Vince87's DIY guide guide for this part, but unfortunately I really don't know what I'm doing when I get past the plug & play connectors!