DIY Cruise Control FAQ (2006-2010 Yaris)

[CTScott]

Originally Posted by CB900F2

Hi Scott.. Maybe we Canuks are lucky in this case, my 08 Sedan has the wire at the ECM, and I can only assume it connected at AD4

I had to confirm and took apart the ECN connector and snapped a photo..
Like you indicated, it appears that there is no access to the AD4 connector from under the dash, but wonder why Toyota/Rostra would put out these instructions if it was not possible?

Maybe to mess with our Cruise Control crazy minds :p

You just need to train a rat to climb up there and plug the pin in for you.

[CB900F2]

Originally Posted by CTScott

You just need to train a rat to climb up there and plug the pin in for you.

I think that should not be a problem, Toyota dealerships have many of those, I think they call them "Automotive Technicians"

[CTScott]

Originally Posted by bairjo

I little constructive feedback on the video i posted a few posts back would be nice as i may consider doing more on future modifications/repairs. Anyone?

I thought you did an excellent job with it. Now, we just need one for the 2008 and older cars that require the ECM and steering column pins to be added.