Yaris Sedan Deadening and Sound system upgrade - Toyota Yaris Forums

sqcomp · 03-09-2011, 02:40 PM

If you do that with a fiberglass floor, it'd be easier. What about that suggestion you made of one vented I6SW?

The distance issue you asked about has to do with phasing and crossover points for the most part. Since you're running active off the deck, you can solve that. Don't worry about it. Jsut ask questions if any issues come up.

derickveliz2 · 03-09-2011, 02:52 PM

Quote:

Originally Posted by sqcomp

If you do that with a fiberglass floor, it'd be easier. What about that suggestion you made of one vented I6SW?

If I go with 1 vented I6SW then I can still do my L6s in the kick panels...

Me thinking....

D.

vimnjicki · 03-09-2011, 04:16 PM

I appreciate all the comments and replies, guys and yes, I know most in this thread has gone past a simple tweeter install. I havent done any car audio in over five years and its still, like a kid learning to walk, kinda exciting to actually not screw up the hole i just drilled and/or not reverse the wire polarity.

derickveliz2 · 03-09-2011, 04:31 PM

Quote:

Originally Posted by vimnjicki

I appreciate all the comments and replies,where is the hole in the firewall through which to run the amplifier power wires? Do I have to make one? Thanks for the replies.

You don't have to make one, Mine is on the passenger's side up under the carpet over the fire wall, others have done it on the pilots side.

D.

RawrDaddy · 03-09-2011, 05:30 PM

Quote:

Originally Posted by derickveliz2

D.

hey derick x do you have any pics of your current audio setup inside your Yaris?

derickveliz2 · 03-09-2011, 07:18 PM

Quote:

Originally Posted by RawrDaddy

hey derick x do you have any pics of your current audio setup inside your Yaris?

What would you like to see?

D.

RawrDaddy · 03-09-2011, 10:38 PM

Quote:

Originally Posted by derickveliz2

What would you like to see?

D.

Where you have your mids and tweets at currently.

..plus i tend to have a thing for the yaris's interior

03-09-2011, 02:40 PM	#1
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	If you do that with a fiberglass floor, it'd be easier. What about that suggestion you made of one vented I6SW? The distance issue you asked about has to do with phasing and crossover points for the most part. Since you're running active off the deck, you can solve that. Don't worry about it. Jsut ask questions if any issues come up. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

03-09-2011, 04:16 PM	#3
vimnjicki Drives: 2008 Yaris 3dr Hatch Join Date: Jul 2010 Location: Redlands Posts: 10	I appreciate all the comments and replies, guys and yes, I know most in this thread has gone past a simple tweeter install. I havent done any car audio in over five years and its still, like a kid learning to walk, kinda exciting to actually not screw up the hole i just drilled and/or not reverse the wire polarity. Last edited by vimnjicki; 03-09-2011 at 04:27 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sound deadening: sq footage amount for 3dr	goku87	In Car Entertainment + Electronics (audio / video / alarm)	29	11-14-2013 12:37 PM
2007 Yaris S Sound Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	70	12-13-2010 07:40 PM
Sound deadening	06vitzRS	General Yaris / Vitz Discussion	10	05-05-2010 01:51 PM
Sedan Door Panel Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	42	06-01-2009 02:47 PM