Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 09-06-2021, 10:03 AM   #1
Ben_
 
Drives: 2010 Yaris Hatch
Join Date: Sep 2013
Location: SLC, UT
Posts: 269
Does anyone have a backup of this PDF??? After 8 years of ownership I'm fed up of no cruise control
Ben_ is offline   Reply With Quote
Old 09-20-2021, 11:43 PM   #2
Clawbrant
I've made a post!
 
Drives: 2005 Subaru Forester
Join Date: Sep 2016
Location: Rochester NY
Posts: 1
Quote:
Originally Posted by Ben_ View Post
Does anyone have a backup of this PDF??? After 8 years of ownership I'm fed up of no cruise control
I second this. I thought I had a copy saved somewhere, but I can't find it.
Clawbrant is offline   Reply With Quote
Old 07-20-2022, 06:24 PM   #3
Evilthorne
 
Drives: Toyota MR2
Join Date: May 2021
Location: Canada
Posts: 2
Does anyone have the pdf for installing this cruise control by chance?
Evilthorne is offline   Reply With Quote
Old 07-20-2022, 07:23 PM   #4
kevinj93
 
kevinj93's Avatar
 
Drives: 2013 NCP130
Join Date: Nov 2015
Location: Sydney, Australia
Posts: 386
Yes. It's about 10 Megabytes. I have put in on Google Drive here
__________________
Running on standard AU 14" steel wheels (14x5 rims, 175/70R14 tyres). Added reversing camera and touch screen radio, cruise control, 16" rear wiper blade, tow bar and dash cam.
kevinj93 is offline   Reply With Quote
Old 06-11-2022, 10:33 AM   #5
Jithin_mp
Jithin
 
Drives: Yaris Sedan 2008
Join Date: May 2021
Location: UAE
Posts: 2
Dear TScott

Any idea cruise control work in Yaris 2008 DCC Yaris Sedan.

Hoping your valuable reply.
Jithin_mp is offline   Reply With Quote
Old 06-11-2022, 04:01 PM   #6
sh0rtlife
 
Drives: 2007 5dr canadian import
Join Date: Dec 2016
Location: pacific north WET
Posts: 1,014
Quote:
Originally Posted by Jithin_mp View Post
Dear TScott

Any idea cruise control work in Yaris 2008 DCC Yaris Sedan.

Hoping your valuable reply.
i would be highly suspect if it didnt work and i say this as ive been thru the toyota cross referance part number catalog and basicly the same part is used for everything toyota from around 2004/05 till at the very least 2011 with some exceptions running significatly longer and some running shorter..specificaly design changes
sh0rtlife is offline   Reply With Quote
Old 07-22-2023, 01:38 PM   #7
Jithin_mp
Jithin
 
Drives: Yaris Sedan 2008
Join Date: May 2021
Location: UAE
Posts: 2
Thank you sh0rtlife. I have received all the necessary parts. I will give it a try. :)
Jithin_mp is offline   Reply With Quote
Old 07-08-2022, 09:51 PM   #8
Evilthorne
 
Drives: Toyota MR2
Join Date: May 2021
Location: Canada
Posts: 2
Does anyone have the part number for the wires we run down the column to the ECM by chance?

Trying to get CC working on a cousins car before she drives across the country with it.
Evilthorne is offline   Reply With Quote
Old 12-28-2022, 07:20 PM   #9
Don mullanix
I've made a post!
 
Drives: Toyota yaris 07
Join Date: Dec 2022
Location: Oregon
Posts: 1
How can i get this cruise control guide for toyota yaris
Don mullanix is offline   Reply With Quote
Old 12-29-2022, 12:25 AM   #10
sh0rtlife
 
Drives: 2007 5dr canadian import
Join Date: Dec 2016
Location: pacific north WET
Posts: 1,014
the link in the post above yours is still good...
sh0rtlife is offline   Reply With Quote
Old 04-16-2023, 04:56 PM   #11
sh0rtlife
 
Drives: 2007 5dr canadian import
Join Date: Dec 2016
Location: pacific north WET
Posts: 1,014
i know with an auto running the coastal range it will downshift and handle it just fine..with a manual your kinda on your own there as to wen to downshift and pop out of cruise
sh0rtlife is offline   Reply With Quote
Old 05-28-2023, 10:00 AM   #12
hypersata
 
Drives: Yaris 2014 GCC LHD 4AT
Join Date: May 2023
Location: GCC
Posts: 2
Hello there,

can anyone help me with the Aftermarket kit for Yaris 2014 GCC - Cruise control?
I cant find something useful on the internet myself.

as I discover from this forum, GCC versions are not supporting OEM CC.

any help would be much-appreciated Folks.

For the reference
NCP151L-CEPRKV
MHFBW9F36F50027xx
2NZFE 1300CC 16-VALVE DOHC EFI
hypersata is offline   Reply With Quote
Old 07-19-2023, 02:01 PM   #13
En4sir
 
En4sir's Avatar
 
Drives: '09 Yaris 3dr HB 5sp
Join Date: Aug 2009
Location: NE Pennsylvania
Posts: 17
I have a 2009 Yaris 2 door hatchback with a 5-speed trans. It has factory installed cruise control and 332,000 miles on the odometer. The cruise control recently stopped working. I've tried to activate the CC however the yellow CC light in the instrument cluster does not illuminate, nor will the CC operate. Hoping the culprit was a blown fuse I inspected all fuses - all seem fine. Then, hoping it was the CC stalk (hoped that the switch wore-out) I replaced the stalk with a brand new OEM stalk #84632-08021 Speed Control Switch. The CC still doesn't operate. I checked the original stalk with a multi-meter and the original stalk has continuous power while the stalk button is kept pressed in, but as soon as I remove all pressure off the button continuous power is disconnected. I assume that's how the on/off button in the stalk is supposed to operate(?).

I'd really like to get the CC operational again. What should be next course of action? I suspect that even if either CC disengage switch on the clutch and brake pedals are faulty, the CC indicator light on the instrument cluster would still light up. Is there a relay that powers the CC? Again, the yellow CC indicator light on the center instrument cluster does not illuminate. Other than the CC not being functional, everything else works flawlessly. Bad relay? Bad ECM? Or?...... Any advice that you may provide to restore my CC is greatly appreciated.
__________________
"Never argue with an idiot. They drag you down to their level, then beat you with experience."
En4sir is offline   Reply With Quote
Old 07-19-2023, 03:08 PM   #14
sh0rtlife
 
Drives: 2007 5dr canadian import
Join Date: Dec 2016
Location: pacific north WET
Posts: 1,014
10-1 odds are its your snail AKA spiral cable, its actualy one of the hardest wearing parts on a car as your basicly bending wires back n forth every time you turn the wheel

9-10 times when a FACTORY CC fails it can be traced to 1 of 2 things, a bad spiral cable or a bad brake switch..and before you go and check if your brake lights work..remember that it has a secondary set of wires on the switch SPECIFIC to the cruise and not part of the brake lights

yet the first thing anyone replaces is the cruise stalk thinking its that....belive it or not ive yet to find one dead that wasnt physically visually damaged on the outside...fun side note is that said switch sometimes replacing it with other bad parts will give a false positive and youll have working cruise for a single use...its because you got lucky...i chased that demon earlier this year on an XB..intermitent CC working..was a combo of the spiral AND the brake switch both were intermitently bad
sh0rtlife is offline   Reply With Quote
Old 07-29-2024, 11:53 PM   #15
CarpeDiem
I've made a post!
 
Drives: 2008 Yaris Sedan
Join Date: Jul 2024
Location: Whitehorse
Posts: 1
Hey guys, I got the kit today and installed the CC in a 2008 Yaris (no cruise light)...fast forward and I can't seem to get it to work. Did some troubleshooting over all connections (Pins are fully seated), checked the ground and the connection at the ECM all seem fine. When checking the voltage at D3 pin1 I have 13.3V, hold down the on/off switch and still 13.3V (not going to 0V). Could it be possible that the offshore Amazon stalk is bad out of the box? Any thoughts?

Thanks in advance
CarpeDiem is offline   Reply With Quote
Old 10-13-2024, 06:17 PM   #16
Cris_co1221
 
Drives: 2007 Yaris 3dr
Join Date: Oct 2024
Location: Alabama
Posts: 2
Quote:
Originally Posted by CarpeDiem View Post
Hey guys, I got the kit today and installed the CC in a 2008 Yaris (no cruise light)...fast forward and I can't seem to get it to work. Did some troubleshooting over all connections (Pins are fully seated), checked the ground and the connection at the ECM all seem fine. When checking the voltage at D3 pin1 I have 13.3V, hold down the on/off switch and still 13.3V (not going to 0V). Could it be possible that the offshore Amazon stalk is bad out of the box? Any thoughts?

Thanks in advance


I am having the same issue, but a 2007 3dr manual. I have all oem parts but cc not working, and same voltage issue when depressing the on/off switch.
Cris_co1221 is offline   Reply With Quote
Old 10-19-2024, 06:41 PM   #17
Cris_co1221
 
Drives: 2007 Yaris 3dr
Join Date: Oct 2024
Location: Alabama
Posts: 2
Quote:
Originally Posted by Cris_co1221 View Post
I am having the same issue, but a 2007 3dr manual. I have all oem parts but cc not working, and same voltage issue when depressing the on/off switch.
My issue was pin #2 on d3 wasn’t fully inserted (ground wire), got that hooked up and am fine now.
Cris_co1221 is offline   Reply With Quote
Old 08-10-2024, 09:47 PM   #18
Markwelch415
 
Drives: 08 hatchback
Join Date: May 2022
Location: Northern CA
Posts: 2
Does anyone have a link for the instructions? I can't seem to get this one to work. Thanks! In very interested in doing this!
Markwelch415 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW VitzBoy General Yaris / Vitz Discussion 7 09-20-2023 07:50 AM
Cruise Control Available for 06/07 Yaris TOYOTaejien General Yaris / Vitz Discussion 8 08-27-2010 12:58 PM
Cruise Control chessclubloser DIY / Maintenance / Service 11 03-27-2010 11:59 AM
2007 Yaris Pricing Info ! YarisBueller New YARIS Purchase Forum 104 06-24-2009 04:54 PM


All times are GMT -4. The time now is 01:41 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.