16x7 - 40mm offset - 195/50/16 rubbing like a fat kid at a Rave - Toyota Yaris Forums

marlondog · 04-13-2011, 04:56 PM

See if your front struts have slotted holes(top bolt). If so, you can have an alignment shop adjust them to get some negative camber going. If that's not the case, you can get some camber bolts from "Garmu-San".

3cyltrbo · 04-14-2011, 09:58 AM

Quote:

Originally Posted by marlondog

See if your front struts have slotted holes(top bolt). If so, you can have an alignment shop adjust them to get some negative camber going. If that's not the case, you can get some camber bolts from "Garmu-San".

The top bolt on the struts ARE slotted and they ARE pushed all the way to promote camber and try to alleviate(sp) the rubbing

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 06:42 PM
hard to find anything that's NOT 38 or 40 offset... will these fit without rubbing?	tonyg	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	10	03-19-2009 08:53 PM

04-13-2011, 04:56 PM	#1
marlondog Shut your fricken suck!!! View User's Garage Drives: 07' liftback Join Date: Mar 2007 Location: Lost Angeles Posts: 755	See if your front struts have slotted holes(top bolt). If so, you can have an alignment shop adjust them to get some negative camber going. If that's not the case, you can get some camber bolts from "Garmu-San".