Double Din Touch Screen DVD/Navigation/iPod System (eBay Edition)

[toy_toronto]

Alex, i don't really know if anyone has actually installed a 2nd display for this hu.

On mine, the 2-zone button appears to be "active" (button can be clicked) but I don't have another display though. I went thorugh the menu settings but could not find any related to enabling/disabling this feature.

In terms of firmware updates, i've searched and found a couple of sites that offer it (sorry can't remember the links it's been a while) but reading through their forums most have been unsuccessful and/or have ended up with 'bricked' units.

If you find a working solution pls do comeback and share what you find =)

-toy

[alex151]

Originally Posted by toy_toronto

Alex, i don't really know if anyone has actually installed a 2nd display for this hu.

However thanks for the reply :)

Originally Posted by toy_toronto

On mine, the 2-zone button appears to be "active" (button can be clicked) but I don't have another display though.

What happens if you click on it?

Originally Posted by toy_toronto

I went thorugh the menu settings but could not find any related to enabling/disabling this feature.

That's my same problem.

Originally Posted by toy_toronto

In terms of firmware updates, i've searched and found a couple of sites that offer it (sorry can't remember the links it's been a while) but reading through their forums most have been unsuccessful and/or have ended up with 'bricked' units.

OK, for the moment it's better to not to change it ;)

Originally Posted by toy_toronto

If you find a working solution pls do comeback and share what you find =)

Sure I will do it =)

[SKurj]

Maybe this weekend I will have a go and try resetting the unit and see if I can get the spectrum to work.

Next question... with PIP i don't have the option to display the radio in the small window and navi in the large (can display everything else). Is that the norm?

I can do radio large, navi small

Should add I cannot get radio to play with Navi large at all.

[toy_toronto]

Let us know how you make out... just in case, the reset hole/button is in the top left hand corner beside the VOL knob.

BTW, did you check to make sure the spectrum analyzer option wasn't disabled?




-toy

[SKurj]

Yes its not disabled

Ahh the reset hole.. thanks I was thinking I would just disconnect the battery for a minute. That solution looks better.