New sub and amp.

[BEEF]

so are you seriesing the two channels to get 4 ohms?

I like the 100oz magnet. when I was in it, RF was still doing spruce pulp cones. suprised they have gone with kevlar. maybe it is just for their power series.

I used to have a single DVC punch power 12 in a geo metro. that thing would hit hard. that was 12-14 years ago though. that was right before I got into JLs. I can't really complain about either of them.

here is what mine looked like (I had the 12" one)http://www.rockfordfosgate.com/rftec...werDVC_MAN.pdf

now I rock the baby seat and the factory system.

[mazilla]

Originally Posted by BEEF

so are you seriesing the two channels to get 4 ohms?

I like the 100oz magnet. when I was in it, RF was still doing spruce pulp cones. suprised they have gone with kevlar. maybe it is just for their power series.

I used to have a single DVC punch power 12 in a geo metro. that thing would hit hard. that was 12-14 years ago though. that was right before I got into JLs. I can't really complain about either of them.

here is what mine looked like (I had the 12" one)http://www.rockfordfosgate.com/rftec...werDVC_MAN.pdf

now I rock the baby seat and the factory system.

Amp is 600W RMS @ either 2 or 4 ohm... Sub is 4 or 1 ohm only. It's a trip, the single power port on the sub is a small plastic piece bolted to the cage, one side says 4 the other says 1. To change between the two you unbolt the connector and spin it 180 degrees.