Spoiler Installed, 2007 Yaris LB.

[Kiteless]

Originally Posted by marcus

i guess you didnt you notice the hole on the left side?? you didnt have to drill on the left side..i just did this install and just used the existing hole going to the washer fluid.. otherwise great install..love this wing too...

Yeaaaaaahhh.... I honestly had not thought of that till after. However the extra hole made getting to the screw hole a lot easier. Kaotic Lazagna had the idea of using one of the magnetic wands to get the nut in place and then I jammed my thumb into the drilled hole to hold it in place so the bolt went through it easier. Then used needle nose pliers to hold the secure it while it was screwed in from the other side.

Oh and I want to go on record by saying that DRILLING HUGE HOLES INTO MY POOR INNOCENT LITTLE CAR WAS VERY TRAUMATIZING!!!111ONEONEONE

But thanks for the Kudos.

- Jason

[Revsson]

Originally Posted by Kiteless

Oh and I want to go on record by saying that DRILLING HUGE HOLES INTO MY POOR INNOCENT LITTLE CAR WAS VERY TRAUMATIZING!!!111ONEONEONE

But thanks for the Kudos.

- Jason

I feel your pain...sort of....as I am pondering drilling a hole for an amateur
radio antenna or two. for a fellow MM owner!

You know we like these types better than cellphone pics.

[Kiteless]

Originally Posted by Revsson

I feel your pain...sort of....as I am pondering drilling a hole for an amateur
radio antenna or two. for a fellow MM owner!

You know we like these types better than cellphone pics.

Thanks man. Just remember to put down to painters mask before drilling. Its mainly just to provide a liiiiitle buffer to help keep the drill bit steady. Using a pilot bit first is also huge. I did that for all 4 of my holes, big and small.

I hear ya on cell phone pics.

- Jason