DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag

[andru47]

So I did this, however using the two switch method I got the on button to work but the set button wouldn't. I drove to 25+ mph and it wouldn't work. What could be the issue?

Edit: It's a 5 SPD, used the jumper cable and no cigar. Any ideas?

[bronsin]

Originally Posted by andru47

So I did this, however using the two switch method I got the on button to work but the set button wouldn't. I drove to 25+ mph and it wouldn't work. What could be the issue?

Edit: It's a 5 SPD, used the jumper cable and no cigar. Any ideas?

You must have wired it up wrong. You must have the up or down wired in there instead.

BTW I thought of the two button but went with the four button and Im glad I did. You can drive the car in heavy traffic by pushing buttons instead of turning it off.

[CTScott]

Originally Posted by andru47

So I did this, however using the two switch method I got the on button to work but the set button wouldn't. I drove to 25+ mph and it wouldn't work. What could be the issue?

Edit: It's a 5 SPD, used the jumper cable and no cigar. Any ideas?

Check the resistor for set. Someone else recently had an issue where the resistors they purchased were incorrectly labeled. If you have a multimeter, you can check the resistance.