Yaris Sedan Deadening and Sound system upgrade - Toyota Yaris Forums

sqcomp · 10-22-2011, 01:54 PM

D,

I was going to say wait on sinking the mid into the kick. Let me do mine first so you can work off my mistakes. That being said, we have different mids. My SEs have a neo motor. With that in mind, I can snug mine almost INTO the side of the kick. lemme show a pic of the area:

The SEs will fit into that area when I place the baffle for the speaker on top of the hole.

That means one can actually put the mid range IN the kick.

Oh...what do you think about me taking the glove box out (since I'll be in the Pro/Am class for IASCA next year) and bringing the 15" up front? MWAHAHAHAHA!!!!

TOLMACH · 10-22-2011, 04:11 PM

Quote:

Originally Posted by sqcomp

D,

I was going to say wait on sinking the mid into the kick. Let me do mine first so you can work off my mistakes. That being said, we have different mids. My SEs have a neo motor. With that in mind, I can snug mine almost INTO the side of the kick. lemme show a pic of the area:

The SEs will fit into that area when I place the baffle for the speaker on top of the hole.

That means one can actually put the mid range IN the kick.

Oh...what do you think about me taking the glove box out (since I'll be in the Pro/Am class for IASCA next year) and bringing the 15" up front? MWAHAHAHAHA!!!!

Re : glove box out / 15 inch sub upfront

How do you plan to fit a sub that needs a huge (btw how big?) enclosure somewhere in the front?

derickveliz2 · 10-22-2011, 11:32 PM

Quote:

Originally Posted by sqcomp

D,

I was going to say wait on sinking the mid into the kick. Let me do mine first so you can work off my mistakes. , I can snug mine almost INTO the side of the kick.
The SEs will fit into that area when I place the baffle for the speaker on top of the hole.

OK, I'll wait...

How thick will you make the baffle?

D.

derickveliz2 · 10-23-2011, 02:22 AM

Quote:

Originally Posted by sqcomp

D,

I was going to say wait on sinking the mid into the kick. Let me do mine first so you can work off my mistakes.

Sorry

,
just didn't resist and cut some sheet metal with rudimentary tools, tomorrow I'll try with a dremel. I didn't want to wake up the crew!

I believe your L4SEs are slightly bigger than my Hertz, I really want to sink in at least the Pilot's side.

D.

10-22-2011, 01:54 PM	#1
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	D, I was going to say wait on sinking the mid into the kick. Let me do mine first so you can work off my mistakes. That being said, we have different mids. My SEs have a neo motor. With that in mind, I can snug mine almost INTO the side of the kick. lemme show a pic of the area: The SEs will fit into that area when I place the baffle for the speaker on top of the hole. That means one can actually put the mid range IN the kick. Oh...what do you think about me taking the glove box out (since I'll be in the Pro/Am class for IASCA next year) and bringing the 15" up front? MWAHAHAHAHA!!!! __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine Last edited by sqcomp; 10-22-2011 at 04:19 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sound deadening: sq footage amount for 3dr	goku87	In Car Entertainment + Electronics (audio / video / alarm)	29	11-14-2013 12:37 PM
2007 Yaris S Sound Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	70	12-13-2010 07:40 PM
Sound deadening	06vitzRS	General Yaris / Vitz Discussion	10	05-05-2010 01:51 PM
Sedan Door Panel Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	42	06-01-2009 02:47 PM