After AFE intake install: Check Engine light. Please help.

[enviri]

I had the same issue. i had to do something drastic and made sure there's no air leaking through the maf hole. I REALLY dont recommend it, but i had a few mafs in my house and used sealant.

I loved the intake design, except for that one stupid maf mounting flaw. Also check if the metal cylinder part where you screw into isn't loose or coming out of the molded plastic. if it is, epoxy or superglue that cylinder in.

[bad]

Originally Posted by enviri

Also check if the metal cylinder part where you screw into isn't loose or coming out of the molded plastic. if it is, epoxy or superglue that cylinder in.

Which metal cylinder part do you mean?

This problem happens most when I have cruise control on and I'm going uphill at anywhere from 45 to 65 mpg.

[enviri]

Originally Posted by bad

Which metal cylinder part do you mean?

This problem happens most when I have cruise control on and I'm going uphill at anywhere from 45 to 65 mpg.

the metal cylinder is covered by the black plastic. its where the screw goes in when you mount the maf.