AUX and USB

[Talifer]

Here's a pic of the model in my Yaris

http://uk.support.tomtom.com/app/ans.../p/2344%2C2454

I was assuming that moving up a model would add more features rather than take some away so I would have expected the cable to be in there. The USB complicates matters because I can clearly see the port is connected at the hand brake but it's hard to tell if it's just the USB or the aux as well. I'll see if I can get some pictures of the wiring behind the port.

[CTScott]

Originally Posted by Talifer

Here's a pic of the model in my Yaris

http://uk.support.tomtom.com/app/ans.../p/2344%2C2454

I was assuming that moving up a model would add more features rather than take some away so I would have expected the cable to be in there. The USB complicates matters because I can clearly see the port is connected at the hand brake but it's hard to tell if it's just the USB or the aux as well. I'll see if I can get some pictures of the wiring behind the port.

That's the Alpine AVN-4429/4430, so the cable mentioned above would be required.

Here is the Toyota install manual for the TNS-410. Look at page 18, which shows the connection for the USB/AUX jack. The connection labeled "C" is the round connector for the audio input, so as long as that connector was plugged into the rear of the unit, it should work.

http://www.toyota-tech.eu/aimuploads..._001_775_2.pdf


Here is the user manual. On page 80 it shows how to enable the AUX mode. It may simply be that they installed it, but never activated that option:

http://www.toyota-tech.eu/aimuploads..._410_UM_EN.pdf