Help! Headlamps giving me grief..!

[revolution]

Just had another look, and adjusted the manual knbos on the motor, which helped mildly when the ignition is off. But once ignition is on, the motors come on, and it moves upwards first, then moves downwards to a very low setting. Took it out for a drive to see if anything would change but it stayed in this position...

[CTScott]

Originally Posted by revolution

Just had another look, and adjusted the manual knbos on the motor, which helped mildly when the ignition is off. But once ignition is on, the motors come on, and it moves upwards first, then moves downwards to a very low setting. Took it out for a drive to see if anything would change but it stayed in this position...

Looking at the Japanese EWD, I see there are red, green and White/black wires going to the two motors, but then there is also the knob inside to adjust them, so yours has something different. I would put the connectors on loosely (without being fully latched) and then turn the headlights on and when they reach the desired position, simply unplug them.