Selling tC (leather) Steering Wheel - Toyota Yaris Forums

Focus_Sh1ft · 05-06-2012, 11:47 PM

No DIYs but here's install pics:
http://www.yarisworld.com/forums/sho...ht=scion+wheel

Also, see Betrivent's post above.

Installation should be simple though and very similar to what I did on the tC. I believe you'll need T27 torx to get the airbag unfastened. Then you pop the clips out of the back of the airbag and unplug anything attached to the clock spring (there's probably a harness for at least the horn). There's probably a 19mm locking nut holding the wheel to the steering column. Take that out, shake the wheel loose, replace with tC wheel, then replace everything. Should be a 10 minute job.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new Leather Scion tC steering wheel!	Betrivent	Photo-Video-Media Gallery	22	12-20-2013 12:20 AM
The Yaris Steering Wheel	wornways	General Yaris / Vitz Discussion	12	10-09-2012 01:41 PM
How much would you pay for a warranty supported steering wheel extension? (3d try)	wornways	General Yaris / Vitz Discussion	36	09-16-2009 10:16 AM
Leather Steering Wheel	MGargano	Cosmetic Modifications (Exterior/Interior)	29	05-08-2009 04:53 PM
OEM foglight switch and leather wrap steering wheel	808yarisLB	Cosmetic Modifications (Exterior/Interior)	8	03-11-2009 12:05 AM

05-06-2012, 11:47 PM	#7
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	No DIYs but here's install pics: http://www.yarisworld.com/forums/sho...ht=scion+wheel Also, see Betrivent's post above. Installation should be simple though and very similar to what I did on the tC. I believe you'll need T27 torx to get the airbag unfastened. Then you pop the clips out of the back of the airbag and unplug anything attached to the clock spring (there's probably a harness for at least the horn). There's probably a 19mm locking nut holding the wheel to the steering column. Take that out, shake the wheel loose, replace with tC wheel, then replace everything. Should be a 10 minute job.