Projectors retrofit, black reflectors and dimmed front turn signals - Toyota Yaris Forums

my2sense · 06-20-2012, 11:39 AM

I forgot to mention that my parts store guy (Wescan) recommended that I used something called Dum Dum to reseal my headlights. It was only $13 and it's holding up good so far even after a recent massive rainstorm.

I had to reopen up my headlights to remove some fingerprints I left on the projectors (gotta be perfect

) and the headlights came apart without too much effort or oven bake. I just heated up the new Dum Dum with a heat gun before I put the housing back together.

We'll see how good it is in the long run but thought I would mention it for anyone thinking for doing a retrofit. I was going to get the Nissan sealant but that would've cost me $36 up here in Canada.

Here's the link to the product: http://www.proformproducts.com/en/pr...33&category=24.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-20-2012, 11:39 AM	#1
my2sense Drives: 2007 Red 5dr RS Join Date: Mar 2012 Location: Vancouver, BC Posts: 35	I forgot to mention that my parts store guy (Wescan) recommended that I used something called Dum Dum to reseal my headlights. It was only $13 and it's holding up good so far even after a recent massive rainstorm. I had to reopen up my headlights to remove some fingerprints I left on the projectors (gotta be perfect ) and the headlights came apart without too much effort or oven bake. I just heated up the new Dum Dum with a heat gun before I put the housing back together. We'll see how good it is in the long run but thought I would mention it for anyone thinking for doing a retrofit. I was going to get the Nissan sealant but that would've cost me $36 up here in Canada. Here's the link to the product: http://www.proformproducts.com/en/pr...33&category=24.