DIY: TACH INSTALLATION INSTRUCTIONS

[ijose 845]

hey im having problems with the greenish blue wire for the rpm read outs. do i stick the wire in the same slot as the greenish blue one? or do i splice the green and the greenish wire together?

[CTScott]

Originally Posted by ijose 845

hey im having problems with the greenish blue wire for the rpm read outs. do i stick the wire in the same slot as the greenish blue one? or do i splice the green and the greenish wire together?

Always make a good connection with wiring. Either use a tap splice connecter (that crimps onto the two wires cutting through the insulation to make contact with both wires) or solder and heat shrink the connections.